No worries, you're good to go. When we say 'automatic' in the product description, we're referring to the fact that the chains will tension themselves down to fit the tire snugly, not to the vehicle's transmission.
The # PWRS64 Pewag Servo chains will fit the 185/55-15 or 195/45-16 tires on your 2013 Fiat 500. I'll link to a demonstration video that shows how to install the chains.
It's recommended that you do a dry run installing the chains in a safe and dry environment like your garage... view full answer...
The Blue Ox Acclaim, part # BX4330, that you referenced in your question will fit Blue Ox removable-tab base plates that are spaced between 23 inches - 30 inches, so they Acclaim will not work for your application.
The Blue Ox Adventurer, part # BX7322, would be the appropriate tow bar that you will need to use instead. It is rated for 5,000 lbs just like the Acclaim, but it is compatible with Blue Ox base plate tabs that are spaced 16 inches - 34 inches. You will need to make sure that... view full answer...
The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - Folding - 48" Long # 298-SX6000B does simply use the vacuum cups as the sole securing factor. Each vacuum cup is rated for 210 lbs pull strength, so this system is claiming 1,200 lbs of pull strength and they have been tested with cargo at highway speeds without issue. The strength is really incredible...I've attached a video to assist.
For increased security and theft deterring, they recommend the window mounted cable anchor... view full answer...
Curt trailer hitch # C11364 was specifically designed to fit the 2014 Fiat 500L. The review suggests that there is no fishwire included. One of our other experts checked this and found no fishwire was included so # 80101-1 would be needed as well.
The ease of installation is relative to the vehicle the hitch is being installed on and not the hitch so much. Installation of a hitch on this vehicle is not difficult, just time consuming.
Regarding a lack of holes in the bumper the reviewer... view full answer...
The Curt Trailer Hitch Receiver - Class I # C11347 is a confirmed fit for 2012 - 2016 Fiat 500 Abarth models. This installation will require slight trimming of the rear fascia as outlined in the attached instructions. It is compatible with both the stock or MPX exhaust. view full answer...
The best fit for your 2013 Fiat 500 Abarth 3-door hatchback with a spoiler at the top of the rear hatch, will be the Hollywood Racks is their Over-the-Top 2-bike carrier, part # HRF2. This unique carrier has a high-rise frame that extends above and over the spoiler at the top of your rear hatch. Please refer to the photo provided which shows this rack mounted on a vehicle with a rear hatch with spoiler. I have also included a video so you can see how this carrier installs.
The # HRF2 features... view full answer...
Yes, the Curt trailer hitch # C11363 will fit your 2015 Fiat 500 Pop hatchback.
I have added links below to the installation instructions and an installation video on a newer fiat for you to take a look at. The installation would be the same for your 2015 model. view full answer...
The crossbar spread of the Inno Aero Crossbar Roof Rack part # INXB123-130, part # INXS250, and part # INK482 on a 2017 Fiat 500X is 23-1/4". This will exclude many cargo boxes but there are still a few options such as the Inno Ridge Rooftop Cargo Box part # INBRA220R-BK which is what I recommend. view full answer...
I have a solution for your hitch and bike rack needs on your 2015 Fiat 500.
Depending on which version of the Fiat 500 we have a hitch that will work for you. I recommend the Curt # C11347 if you have the Abarth style, but if you don't then the Curt # C11363 will be the correct fit for you.
The bike rack I recommend for you would be the Kuat Beta # B202-114. This 1-1/4 bike rack carries 2 bikes and is lightweight and will work with the 3-3/4 inches clearance you will need with your... view full answer...
To flat tow your 2013 Fiat 500 Sport it will need to have a manual transmission and you'll need the following components:
Baseplate: Blue Ox Base Plate Kit # BX2800.
Tow Bar: Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380. This tow bar also includes safety cables so you won't have to purchase them separately.
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit will splice into your tail light wiring to display your motorhome's traffic... view full answer...
We can get you everything you need for your 2016 Fiat 500X. For a trailer hitch I recommend the Curt # C13271.
The Curt hitch has a maximum tongue weight of 525 lbs and max towing capacity of 3,500 lbs though you would need to make sure you do not exceed the weight capacities listed in your Fiat's owner's manual.
For wiring you need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. view full answer...
The Square Bar Inno Kit is a confirmed fit for your 2017 Fiat 500x with the sunroof. You'll want to verify your vehicle's roof capacity with your owner's manual or manufacturer prior to loading anything onto the roof bars. Sunroofs tend to have a lower overall capacity.
This kit consists of:
Inno Square Crossbars, 50 Inches, part # INB127
Inno Foot Pack for Square Bars, part # INSUT
Inno Fit Kit for Fiat 500X, part # INK482 view full answer...
You are wise to consider the spoiler on your fiat 500e as you choose a suitable trunk-mount bike rack. Roofline spoilers like the one on your 500e can pose a challenge to fitting a trunk-mount rack, but fortunately the smart folks at Hollywood Racks have developed 2- and 3-bike carriers that are completely compatible with this vehicle feature.
The Over-the-Top 2 # HRF2 and the 3-bike version # HRF2-3 feature a unique arched frame construction that extends up and over your roofline spoiler.... view full answer...
Yes you can remove the cargo carrier of the Yakima EXO Swing Away 2 Bike Rack # Y34ZR from the rest of the rack. It is designed to fit 2 inch trailer hitches. Which for your 2016 Fiat 500X we have the Curt part # C13271 which is a confirmed fit. Your Ford Transit based motorhome would also have this hitch size as well. view full answer...
The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B you asked about are definitely rated for speeds of 70 mph in good driving conditions. Each of the 6 vacuum cups is rated for a pull strength of 210 lbs. This rack on your vehicle is rated for up to 150 lbs at those highway speeds, so you will not have any issue as long as your board is secured to the rack well.
I recommend using the SUP and Surfboard Pads for SeaSucker Monkey Bars - 19-1/2" Long - Qty 2... view full answer...
I do have a roof rack fit for a 2015 Fiat 500 Abarth but it is not from Thule, rather Yakima. I did check with Thule but they do not list a fit for the Abarth. That said, I called Yakima and they said the Yakima JetStream Crossbar System part # Y00425, part # Y28TR, part # Y06110, and part # Y06123 will work. I have attached a photo below. view full answer...
Yes, the Hollywood Racks Bike Rack part # HR1450Z that you referenced would work with 24 inch wheels so it should work well for you. I attached a review video for this rack for you to check out as well. view full answer...
If your 2016 Fiat 500X has a naked roof, you can absolutely use the Inno roof rack that has the XS200 feet.
The correct parts for the rack are Aero Crossbars # INXB100-108, Flush Feet # INXS200 and Custom Fit Kit # INK482. This will give you a complete roof rack with bars that are aerodynamic to give you a quiet ride; they also have T-slots which will allow you to mount some accessories and come with locking covers to help protect your investment. view full answer...
The roof rack I highly recommend for your 2017 Fiat 500 is from Yakima and consists of the following parts:
- Yakima JetStream Crossbars # Y00425 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06110
- BaseClip Fit Kit # Y06123
This roof rack will look graceful atop your Fiat due to the aerodynamic shape of the JetStream crossbars. The aero shape of these bars, along with their built-in WindRidges, is also what ensures that this roof rack minimizes the wind... view full answer...
We can get your 2012 Fiat 500C set up with baseplates for your Roadmaster Falcon 5250 tow bar, and I verified directly with Roadmaster that the correct fit for your Fiat is the following:
- Roadmaster Crossbar-Style Base Plate Kit # 522013-1A
You mentioned other hardware, and while there isn't any other hardware needed for the base plates, I'll go ahead and list out the other parts you'll need to flat tow your Fiat 500C in case you need those parts.
- Safety Chains: Roadmaster Safety... view full answer...
Go To Results