I attached a link to all of our trailer wheels that match what you are looking for that are aluminum, 16 inch in diameter, and are 8 lug like you need. I really like the part # 274-000039 as I think it looks really good but maybe not too over the top. Your tastes might vary though! view full answer...
The best way to look at this is by comparing Lumen output. Your 55 watt halogen flood light has about 1,000 lumens. The 55 watts 12 volts is pulling 4.583 amps for each light.
The Great White LED Work Light # PE42CR will give you 2,000 lumens (twice the light) and only use 2.89 amps of 12V power. It has a Flood light beam so light will be spread across a larger area than that of a spot beam. view full answer...
For a pre-greased hub/drum to fit the axle of your 2005 Trail Cruiser you'd want the part # AKHD-545-35-K and then for self-adjusting brake assemblies you'd want the # AKEBRK-35-SA which is a set that includes a left and right hand assembly. view full answer...
As long as the your current inner tube of your gooseneck coupler on your 2004 Featherlite 8541 measures 4" in diameter then you can absolutely use just the inner tube of the Round Gooseneck Coupler with 28" - 38" Adjustable Height - 24,000 lbs # SAC2516-I you were looking at.
Another option is just purchasing the Bulldog BX1 Gooseneck Coupler Inner Tube - Round - 2-5/16" Ball - 25,000 lbs # BD1289020300 which is just a the inner tube and will save you a little bit of money over buying... view full answer...
I would be happy to help!
The correct replacement wheel studs for your Dexter Hub and Drum Assembly 008-219-13 (our part number # 8-219-4UC3) is the # 7-257, and the compatible lug nuts is the # 6-53.
For a replacement silver wheel we have the Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 # AM20794 which is the correct size and bolt pattern for your 2010 Elite 3 Horse Slant Horse Trailer, but is a slightly different design than the wheel in your picture.
I included... view full answer...
We do have Optronics trailer clearance lights that match the dimensions you mentioned with the part # AL90AB for amber and part # AL90RB for red. view full answer...
If you wanted to wire the LED light part # 328-003-84R strictly as a third brake light you'd want to use just the red wire for the stoplight signal, brown for the taillight, and then white for ground. The turn signal wire could be taped up and simply not used. view full answer...
We would definitely be able to upgrade to a higher capacity Leaf Spring or Silent Ride set up. That being said, we do not carry torsion axles, so we do not have a bolt on upgrade available.
The axle # 8327820-EB would upgrade you to 5,200 pounds per axle, but with the spring seats being 74 inches from center to center, it is pretty specific as to what it fits. As you do not have any spring seats on your current axle, you would need to measure from center of your frame to the center of... view full answer...