For your lead jack leg on your Lippert Venture Landing Gear VMC900R-327953, you will want to use the Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear # LC146059.
As for a follow leg kit, you will want to use the Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear # LC146060.
Attached are a couple of review videos for you to check out. view full answer...
When choosing a weight distribution hitch, you want to choose based off of the loaded tongue weight of your trailer; I wasn't able to find any definitive specs on this specific model but most of the trailers I found in the Attitude line had tongue weights of around 1000-lbs. You will want that tongue weight to fall towards the middle of the range of the weight distribution system that you choose.
With all of that considered I recommend using something like the Equal-i-zer Weight Distribution... view full answer...
When it comes to The Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW # EQ37121ET, The Equal-i-zer Weight Dist Shank - 2-1/2 inch Hitch - 8 inch Rise, 4 inch Drop # EQ90-02-4800 will work together.
The shank slides into your hitch receiver and provides the attachment point for your weight distribution system's head assembly. It has a maximum tongue weight up to 1,600 pounds and has a maximum gross towing weight up to 16,000 pounds. The... view full answer...
Go To Results