bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about CrossRoads


  • Correct Replacement Lift Handle for a Curt Weight Distribution System
  • It sounds like you're looking for the Replacement Lift Handle for Curt Weight Distribution Systems # C17112. This bar will work with Curt trunnion bar and round bar weight distribution systems.
    view full answer...

  • Replacement AC Unit For A 2017 Crossroads Z-1 278RR
  • When it comes to replacing your AC Unit on your 2017 CrossRoads Z-1 Travel Trailer I recommend The Advent Air RV Air Conditioner - 15,000 Btu - Black # ACM150B. This AC unit lets you replace your existing AC or add a new AC to your RV or camper. It works with your existing Advent Air, Dometic, Coleman Mach, or Carrier air distribution box and thermostat. The wiring kit is sold separately may be required. This system is compatible with a ductless or ducted system. The AC has a black,...
    view full answer...

  • Recommended 5th Wheel Storage Skirt for 2013 Crossroads Zinger
  • It sounds like you're looking for a storage skirt for your 2013 CrossRoads Zinger 5th wheel trailer and there are two dimensions you'll want to know in order to find the correct one: the distance from the bottom of the overhang to the ground, and the length and width of the overhang portion of the trailer. We do have a couple options available that you can choose from, depending on the measurements you find. - Adco Storage Skirt for 5th Wheel RV - Vinyl - White - 236" Long x 64" Tall...
    view full answer...

  • Pop-Up Drain For A Better Bath Single Bowl RV Bathroom Sink
  • The LaSalle Bristol Pop Up Drain for RV Bathroom Sinks # 34465WPR1303 will work great for your Better Bath Single Bowl RV Bathroom Sink # LC209635.
    view full answer...

  • Recommended Second Air Conditioner With Wall Mounted Thermostat for a 2017 Crossroads Volante
  • We actually have kits that are already pout together that has everything you need. For a black unit, you can use the Advent Air RV Air Conditioner System - Manual - 13,500 Btu # ADV44FR, or for a white unit we have the Advent Air RV Air Conditioner System - Single Zone # ADV94FR. Each kit has everything you need for a full install to include a wall-mounted thermostat, an air distribution box, as well as the mounting bracket/hardware for the unit itself.
    view full answer...

  • Replacement Parts For Thomas Payne Power Recliner That Will Not Recline
  • When looking into why your Thomas Payne Power Recliner won't recline it sounds like the control boxes have gone bad. The Replacement Control Box For Thomas Payne Momentum Recliners and Sofas # 195-387596 will get your recliner to recline again. This is for the Momentum Recliner. If you have The Thomas Payne Seismic Recliner you will need The Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas # LC36FR. I attached a review video link below.
    view full answer...

  • Mounitng Hardware And Shocks Needed For The Roadmaster Comfort Ride Suspension System
  • The Roadmaster Comfort Ride Shocks can be purchased separately with part # RM-204000-00. We unfortunately don't sell the mounting hardware separately so you would either have to purchase it directly from Roadmaster or from your local hardware store. I've listed the hardware use to mount the shocks below: 24x M12 flat washer 8x M12 x 1.75 x 100mm bolt - class 8.8 8x M12 x 1.75 nylon insert lock nut - class 8.8 8x 1/2" spacer
    view full answer...

  • Recommended Trailer Hitch Receiver to Double Tow a Small Trailer Behind a 5th Wheel Trailer
  • Our most popular RV hitch is the Curt # 13703. You need to measure your fifth wheel trailer's frame to confirm a fit because it's a universal design. It's made for frames that are 22 to 72 inches wide and has a maximum towing capacity of 3,500 pounds. If this Curt hitch doesn't work for your trailer I've also linked our complete selection of RV hitches for you.
    view full answer...

  • Recommended Axle Upgrade for a 4,400 lb Lippert Axle
  • We do carry the Trailer Axle w/ Electric Brakes # e75SR which would be an upgrade to your 4,400 lb axles. You're just going to need to measure your hub-face to hub-face and your spring-center to spring-center. This particular axle has an 89" hub face measurement and a 74" spring center measurement so if that's what you have then this axle will work great. If not, come back with those measurements and we'll find something for you. You're also going to need new u-bolts. I recommend going...
    view full answer...