It appears the 3-Leaf Double-Eye Spring # SP-072275 is the closest size we have to the measurements on your 2012 Coachmen Clipper 126 Popup camper. This leaf spring is rated for 3,330lbs when used as a pair while your trailer uses a 2,500lb axle. It is 18-5/16" long when unloaded and will extend to 20-1/4" when flat. It attaches using 9/16" bolts.
The Phoenix USA Flexy Flares # PX52-188 allow you to add rubber fender trim to your camper to help keep rain as well as rocks, dirt and rocks... view full answer...
Dexter designed the # K71-652-00 EZ Flex as a direct replacement for the 013-104 equalizer.
If you didn't want to use that, the Lippert Equa-Flex # LC279687 should be close enough in height. Lippert tells me that if the height difference was any greater, you'd need to go with a shorter equalizer hanger to account for the height difference, but a 1/2 inch height difference shouldn't cause any problems.
If you click he provided links, you can see some installation videos that you might... view full answer...
I tried looking up what vents came on your 2011 Coachmen Chaparral 268RLE but unfortunately it doesn't look like Coachmen kept a record of that. If you can let me know what brand you have I can see if we have a replacement screen for it as these are specific.
I can definitely help you find a replacement dome lid as well! These are pretty universal and all you need to do is note what kind of hinge your current lid uses; 3-point, 4-point, or continuous. If you aren't sure the manufacturer... view full answer...
Generally speaking, you can simply replace the incandescent tail light assemblies with LED tail light assemblies without any additional wiring. Almost all aftermarket tail light wiring and most factory harnesses accept both incandescent and LED so you don't have to worry about adding resistors. For a set of LED trailer tail lights, I recommend the Optronics LED Combination Trailer Tail Lights part # TLL160RK but I have attached our entire selection below if you have a different style. view full answer...
In order to recommend best options for you I would need to know what type of valve you have as well as the size. The most common is 3" for black water tanks and 1-1/2" for grey water tanks. If you just need a replacement economy valve body then the Valterra Bladex Waste Valve Body, # T1003VP is a great option. The valve body, seals, nuts, and bolts are all included. This fits Fits Bladex, Valterra, Bristol, and Anonda valves, please verify the currently installed valve brand against this. view full answer...
We do indeed offer a replacement U-Bolt kit as part # TR-2200. The kit includes the following:
• 2 U-Bolts
• 4 Nuts
• 4 Washers
I've also provided a photo showing the dimensions of the U-Bolts used. view full answer...
What you need is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners # AT3308046006. This is the correct shroud for your Dometic 600312.321. view full answer...
Thank you for the pictures and information provided. While the Atwood 75721 motor and gear boxes are discontinued, we do have a gear box that will work with your Atwood 75721 motor and landing gear.
- Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602
The Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602 is made of aluminum. view full answer...
In order to find the correct replacement parts you will need to measure center hole to center hole on your current shackles. You will also need to measure the inner and outer diameter of your bushings.
The Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles # LC52SV is designed to work with Road Armor equalizers like the # LC696740. I can't exactly tell from the pictures but I do not think you have these.
The idea would be to match up what you currently have with an upgrade... view full answer...
To determine the correct replacement J-Roller for your 2001 Coachmen Sportscoach Motorhome you'll have to measure the height, length, and width and note how it mounts. Rollers can be surface mounted, side mounted, recessed mounted, or even partial recessed mounted.
For example, the Global Link Replacement Roller for RV Slide Out # 295-000175 you were looking at is 2-15/16" wide x 4-5/8" long x 1-9/16" tall and is recess mounted.
If you can provide me with the measurements and mounted... view full answer...
The Double RV Waste Valves # T18C that you referenced is a very common valve on RVs like yours. Theres a good chance this is what you need. This slips over a 3 inch pipe on the bigger siade and the smaller side slips into the 1-1/2 inch pip. view full answer...
We do have a variety of stainless steel exhaust tips that you can potentially use on your 2017 Coachmen Leprechaun Class C Motorhome, but you'll need to compare the diameter and length of what we have available with what is currently on your motorhome as I don't have the specs for that on-hand.
For example, we have the MagnaFlow 5" Exhaust Tip # MF35214 which is a 13" long clamp-on style that fits a 4" tailpipe. If you can get me the specifics of your current exhaust tip I'd be more than... view full answer...
I spoke with Lippert and they informed me that you have a Kwikee 25 Series Step therefore the correct replacement motor for you is the Lippert Components Kwikee Step Motor for 25 Series part # LC369506. The part number number you provided of "909509000" was used to reference the above. view full answer...
The 334850 part number you mentioned refers to the Replacement Control Switch # LC334850. This particular unit replaces the control switch assembly for certain Lippert Tread Lite RV Steps ( # LC353542, # LC353543, # LC353620, or # LC353621). view full answer...
It sounds like your 2008 Coachmen Mirada 310DS is using lights like the LED Trailer Tail Light # OPT68FR which is held in place with a Rubber Grommet # A45GB. As no one is currently making a replacement lens for you lights you will need to measure the cutout to verify that you will be able to replace your lights with these. The rubber grommet is sized for a 4-1/2" hole. The light connects with a 3-Wire Pigtail # A47PB which can be spliced in if your light uses a different connection. view full answer...
The Lippert 5,200 lb axle you have has a hub face to hub face of 86.5 inches which is identical to the Dexter # 8327816 you referenced, however the 68.5 inch spring seats of your Lippert axle are not identical to the 71.5 inch spring centers of the Dexter axle. They do use the same spindles so the bearings and grease seal will all match. You would simply need to weld spring seats onto the axle at the 68.5 inch on center locations using # TRSS300. view full answer...
You are correct that the proper replacement motor for your Atwood 75721 is the Replacement Motor for Stromberg Carlson Electric Landing Gear, part # LG-142178.
You are also correct that the gearbox compatible with this motor is the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear, part # LG-179015.
Good work on finding the correct parts for your motor. This will definitely work for you. I've linked to a video review that includes both of these parts. view full answer...
Thank you for the picture which allows me to confirm the correct parts. Your Dexter D52 axles under your 2018 Coachmen Freedom Express Blast 271BL toy hauler came with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459. We do have the Left # K71-675 and Right # K71-676 hand shoe assemblies if you only wish to replace the shoes. This was paired with the Dexter Trailer Hub and Drum Assembly # 8-201-5 if your current drums are wore past their usable limit. We do have the Bearing... view full answer...
We have a number of replacement red lenses. But unfortunately, your RV information does not tell me what lights that you have on your Leprechaun.
A pretty common light is something like the Optronics # MC32RB. Which has a replacement lens of # A32RB. This light measures 4 inches long and 2 inches wide. You can compare this to the dimensions on your existing lens to see if it might work as a replacement.
Otherwise, I recommend seeing if you can find any part or manufacturer information... view full answer...
We do have plenty of replacement lenses that may work great for you, however in order to determine the correct replacement lens we would need to know how big of a lens you need first.
If you're able to provide an accurate length and width for the lens you need we'd be happy to help you.
I have also attached a link of all our exterior lights for you to check out as well. view full answer...
Go To Results