For your tandem dually axles with 16 inch wheels you will want to use the Namsco Wheel Liner - 16", 8-Lug Dually - 8 HH - 1 Rear Liner # NA7168E3JC or the Replacement Rear Liner for Wheel Masters Wheel Liner - Qty 1 # WM0255. The single replacement options are the only way to get them outside of the kits that include the front wheels that you don't need. view full answer...
The winch mount that we carry to fit your 2011 Can-Am Outlander 800 is the Bulldog Winch # BDW15113.
We also have a 3,000 pound winch, part # BDW15002, that will fit to the mount. view full answer...
The self centering roller part # CE29505 does not come with a mounting bracket but for that we have the # CE10305G for a bracket and for a roller # CE10727A which includes pal nuts. view full answer...
Yes, you can use Superwinch ATV winch # SW1125220 on your 2016 Can-Am Maverick. You just need the correct mounting kit. I recommend mounting kit # BDW15178. It is a custom fit mounting kit for your Maverick and the winch will fit it as well. view full answer...
Most likely the additional 2 wires are a power and ground supply for your trailer. I recommend verifying all the wiring connections for both your Can Am Spyder and the Roll-a-Home trailer on the 5-way circuit to verify they are identical functions. With the 2 additional prongs running to the Junction Box # 3375601100 you should be able to remove the cover and follow the wires to verify they do go to the Brake Controller # 90195.
If this is what you have you will need the Adapter # MA69BR... view full answer...
A trailer 5-way normally has different functions than what you described: right turn, left turn, tail lights, ground and and additional wire that is usually tapped into the backup lights to disengage the hydraulic trailer coupler. We would not have an adapter that works with the functions you currently have so I recommend cutting off the 5 way, splicing your wires together and adding 4-way connector # 18004. view full answer...
Trailer wheels like the # AM3H350 that you referenced have a zero offset which means the mounting flange of the wheel is exactly in the middle of the wheel. That means the backspacing of this would be 4.15 inches since this tire has a section width of 8.3 inches.
So you'd need 4.15 inches of clearance between the hub face on your axle and the frame of the trailer. view full answer...
We have great spare tire covers that would work well on your 30 inch diameter tire that is 10 inch wide but nothing we offer has a draw string in it. Instead check out the Bestop Large Tire Cover # B6103035 which fits your tire size perfectly, is black in color, and uses a strong elastic band to secure to the tire. view full answer...
Most Superwinch winches use the standard 10 x 4-1/2 inch or the 6-1/2 x 4-1/2 inch bolt pattern. If the mounting bolt pattern on your winch is compatible, you can use the Curt # C31010 receiver mount. The winch would install using 1/2 inch hardware which isn't included. A pin and clip like part # PC3 is also sold separately. view full answer...
We do have engineering diagrams for the Timbren Axle-Less Trailer Suspension System # A35RD545E that you referenced, and we do show these on our product page. If you scroll down a bit you'll find several measured drawings of this system with dimensions and mounting points.
I have also linked one of these images for your review.
This kit installs either by welding or bolting to your trailer frame and two sets can be used for a tandem-type application (but not three). Included are built-in... view full answer...
The Bulldog Winch Powersports Series 2500 winch part # BDW15006 would be a great option to replace the Warn XL2500 that you have. The wiring harness wouldn't be a plug and play/direct install but it would be a pretty simple transition. I attached an install video for this on a similar ATV for you to check out as well. view full answer...
We do have Bulldog Custom-Fit UTV Winch Mounting Kit # BDW15164 that is confirmed to work with your Can-Am Maverick DPS. Then I recommend the Bulldog Winch Powersports Series UTV Winch - Synthetic Rope - Hawse Fairlead - 4,000 lbs # BDW15012 which has the matching 3 inch by 6-5/8 inch mounting pattern that uses 4 bolts. view full answer...
The winch you referenced, Superwinch Terra Series ATV Winch # SW1145220, has a 4-bolt mounting pattern for the winch that measures 3- x 6.66-inches on the hole centers. This hole pattern is compatible with the Bulldog Custom-Fit Steel ATV Winch Mount # BDW15113. view full answer...
I contacted the manufacturer and currently the only replacement remote available is the Replacement Wired Remote Control with 12' Cable # SW93GR. Which is the 12' version. There currently is not a 30' or wireless option available.
If you wanted to upgrade your winch to a winch with a wireless remote you could get the ComeUp Cub ATV Winch w/ Mounting Plate # CU123933 which would use the ComeUp Wireless Remote Control # CU881286 to control the winch wirelessly. view full answer...
The winch mount part # BDW15108 is a fit for your 2015 Can-Am Outlander 450 and is compatible with the Superwinch LT3000 part # SW1130220 that you have. view full answer...
According to Air Raid, Their # AR883-314 SynthaFlow Air Intake fits all models of the 2014 Can-Am Commander, including those equipped with the 800 cc engine. view full answer...