For your tandem dually axles with 16 inch wheels you will want to use the Namsco Wheel Liner - 16", 8-Lug Dually - 8 HH - 1 Rear Liner # NA7168E3JC or the Replacement Rear Liner for Wheel Masters Wheel Liner - Qty 1 # WM0255. The single replacement options are the only way to get them outside of the kits that include the front wheels that you don't need. view full answer...
We do have Bulldog Custom-Fit UTV Winch Mounting Kit # BDW15164 that is confirmed to work with your Can-Am Maverick DPS. Then I recommend the Bulldog Winch Powersports Series UTV Winch - Synthetic Rope - Hawse Fairlead - 4,000 lbs # BDW15012 which has the matching 3 inch by 6-5/8 inch mounting pattern that uses 4 bolts. view full answer...
The self centering roller part # CE29505 does not come with a mounting bracket but for that we have the # CE10305G for a bracket and for a roller # CE10727A which includes pal nuts. view full answer...
According to Air Raid, Their # AR883-314 SynthaFlow Air Intake fits all models of the 2014 Can-Am Commander, including those equipped with the 800 cc engine. view full answer...
We do have engineering diagrams for the Timbren Axle-Less Trailer Suspension System # A35RD545E that you referenced, and we do show these on our product page. If you scroll down a bit you'll find several measured drawings of this system with dimensions and mounting points.
I have also linked one of these images for your review.
This kit installs either by welding or bolting to your trailer frame and two sets can be used for a tandem-type application (but not three). Included are built-in... view full answer...
Most Superwinch winches use the standard 10 x 4-1/2 inch or the 6-1/2 x 4-1/2 inch bolt pattern. If the mounting bolt pattern on your winch is compatible, you can use the Curt # C31010 receiver mount. The winch would install using 1/2 inch hardware which isn't included. A pin and clip like part # PC3 is also sold separately. view full answer...
We have great spare tire covers that would work well on your 30 inch diameter tire that is 10 inch wide but nothing we offer has a draw string in it. Instead check out the Bestop Large Tire Cover # B6103035 which fits your tire size perfectly, is black in color, and uses a strong elastic band to secure to the tire. view full answer...
Hi Terry,
With them being obsolete we will not have them either, but we can most likely find a suitable replacement. I'll just need some dimensions on the lights in order to find a compatible fit. If you want to send me those measurements and some pictures of the lights I can see if we have anything that matches. view full answer...
Trailer wheels like the # AM3H350 that you referenced have a zero offset which means the mounting flange of the wheel is exactly in the middle of the wheel. That means the backspacing of this would be 4.15 inches since this tire has a section width of 8.3 inches.
So you'd need 4.15 inches of clearance between the hub face on your axle and the frame of the trailer. view full answer...