The replacement vent lid compatible with your 2004 Bigfoot motor home is the Replacement Cover for Heng's and 1995+ Jensen Style Vents Item # 69284. The vent lid is only going to be available in white. view full answer...
The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening - 2" Hitches # RM-195225 is compatible with the 24x60 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs # C18151 as long as the tongue weight when using the spare tire carrier is under 400 lbs. The cargo carrier itself weighs 55 lbs leaving a maximum cargo weight of 345 lbs.
The carrier will be 9 inches from the center of the hitch pin to inside edge of the carrier when folded. Your tire has a width of... view full answer...
The Firestone Ride-Rite Air Helper Springs # F2153 are confirmed to fit the 2003 Ford E-450 cutaway chassis under your 2003 Bigfoot 29G motorhome. You will need to confirm you have 8" of space from your frame to the inside of the inner tire to ensure it will not have any clearance issues.
The Air Lift WirelessAIR Compressor System # AL74000 will allow you to control the air pressure in the springs from either the included remote or from your smartphone using the Air Lift app. This also... view full answer...
The etrailer Snoblock Snow and Ice Windshield and Wiper Blade Cover - 70" Wide x 39" Tall # 288-06603 is a great fit for your 2002 Bigfoot 30MH29RQ Class C motorhome and is my recommendation. There are a couple other options like the Hopkins Winter Protection - Double-Sided Exterior Windshield Cover # HM17511 and the Hopkins Heavy-Duty ArcticGuard Snow and Ice Windshield Cover # HM17529 which are designed for snow. I personally think the etrailer Snoblock is a better quality and more... view full answer...
You should have the same wheel bolt sizes on your hub and drum assembly; parts should be uniform on both sides of your suspension to minimize any potential issues as well as rectify those issues should they occur. Since you know you have axles rated for 7,000 lbs and you know that your drums have 8-219 stamped on them, replacement assemblies are available, though I highly recommend confirming what you need by taking apart your hub assembly and looking at the bearings themselves; wipe away... view full answer...
Go To Results