As your 2012 Aliner Expedition has a GVWR of 3,500lbs you most likely have the standard #84 spindle which will use the Bearing Kit # BK2-100. If you can find the axle tag or serial number stamped on your axle I can confirm this is what you have with the axle manufacturer. Otherwise you might pull one of your hubs apart to verify you have the following bearings and grease seals.
Inner Bearing # L68149(Inner Diameter 1.378")
Outer Bearing # L44649(Inner Diameter 1.063")
Grease Seal # 58846(Inner... view full answer...
The Pro Series Round, A-Frame Jack # PSRV20000103 will definitely definitely fit in frame as the 3" triangular bolt pattern is a standard, but I cannot 100% say that your existing wheel will fit. It most likely will, but I do have an option that I can 100% say will work.
The etrailer.com Round A-Frame Trailer Jack # TJA-5000T-B is a RAM jack, though this will be a little more heavy duty than your original one. It will have a 5,000 pound support capacity, a 3,000 pound lifting limit, and... view full answer...
Yes. the Bearing Kit # BK2-100 is the correct kit for the 3,000lb axle under your 2010 Aliner Classic. If you determine your Hub/Drum # AKHD-545-35-K is worn we do have these you can replace. We also have the Left # AKEBRK-35L and Right # AKEBRK-35R brake assemblies if they also need replaced. view full answer...
Yes, the Electric Trailer Brake Kit # AKEBRK-35-SA will replace the brakes that came on your 2013 Aliner Classic With the AL-KO axle. view full answer...
I will say that it's not uncommon to have the open hatch on your fan open facing the direction of travel, so the orientation of your fan isn't a huge concern; they normally do a fairly good job of keeping most of the moisture out of your camper when they are closed properly. With that being said, the MaxxFan Deluxe Roof Vent # MA00-07500K is a great upgrade that will certainly do a superior job of keeping any rain or other moisture out of your camper.
You'll need to make sure that you... view full answer...
While we do not carry tail lights that are explicitly designed for your 2014 Aliner Scout Camper, we carry a wide variety of tail lights, so I'm sure we have something for you.
I've linked to a list of our lights below for you to narrow down what would work best for you. You can use the filters to determine what matches your current lights. For example, the Triple LED Trailer Tail Light, part # CE44VR, is a rectangle light with red and white lights and stop, turn, tail, and backup light... view full answer...
I spoke with someone at Aliner and they said the replacement bearings for the 2013 Aliner Expedition Camper are the same as the 2014 model. You will have to measure the bearings on your wheel. I will include a diagram that explains how to measure the bearings, races, and seals. For example, if you have Replacement Trailer Hub Bearing - L68149, part # L68149, the inner diameter of the bearing is 1.378".
I have included a product description link, video review link, and a weblink to the... view full answer...
Go To Results