Replacement Namsco Wheel Cover - 19-1/2", 8-Lug Wheels - 10 HH - Front - Qty 1

Video Transcript for Namsco Wheel Accessories - Vehicle Wheel Cover - NA719581 Review

Today we're going to take a look at the Namsco Stainless Steel replacement Front Wheel Cover. This is a custom fit part, it is designed to fit Ford vehicles with the 19-1/2" inaudible 00:00:09 on front wheels and on any custom fit part wheel I just always like to recommend to go to our website use our fit guide, put in your year model vehicle and it'll show you if this would work for your application. Now this replacement wheel cover will fit over a wheel on the front of your vehicle. It is a nice low profile design, which will go over a nice sleek look. It does stay looking great for years due to the 304 stainless steel construction which is very sturdy and rustproof. You notice the outside has a nice mirror finish to give you a nice eye catching shine. Now the mounting hardware is included for installation, also includes this anti-rotation bracket retention system will hold this hubcap on the center of the wheel so that it won't rotate or wobble. A few specs on this again, the application is for Ford Vehicles with 19-1/2" wheel diameters, 8 lug designed front wheel.

It does not fit split rims and this part number is a quantity of 1 wheel cover. Just to show you how this installs briefly and they do give you a nice set of instructions on how to install it. But basically these caps over the lug nuts can be removed and the center cap can be removed. On these lug nuts if you ever need to access them you just pop the cap off and that'll give you access to the lug nut. Then on the center cap there's notches right over each pin right there you can just pop that right off. Once you pop that off when you go to install this what your first step you want to do is take this bracket, sort of the vent bracket and this is going to attach to the wheel studs on your wheel so you don't have to remove the lugs on the wheel you just leave them where they are.

Fit this over the stud and using these 2 nylon lock nuts you'll go ahead and tighten that down to hold this bracket on to the wheel and at the centers is a nice threaded stud right there so once this is installed on the wheel what you're going to do is you're going to take the anti-rotation bracket system and there's 2 holes inaudible 00:02:01 tabs through there just like that and then your screw will go right through the middle hole. Then with that on there this bracket will already be on their lugs are the wheel studs on the wheel. They'll line up just like that and then what you do is tighten this screw right here into that threaded stud right there. What you want to make sure is these tabs right here, you want to make sure they go through those holes before you tighten that on just like that. The reason you do that is those tabs is what keeps it from rotating, keeps this wheel cover from rotating on the wheel. Once you line those 2 holes up then you go ahead and tighten that down and just snug it down.

Once it's all snugged down then you can just take your center cap, line the tabs up, and then pop it right over then it covers it so you can't even see how it's installed. Very simple installation. That should do it for the review on the Namsco Stainless Steel Replacement Front Wheel Cover.