Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Designed to look like the factory lights on 1980-1998 Ford trucks, these roof lights make your Ford F-250 and F-350 more visible to traffic and give it a big rig look. Amber lights come with white incandescent bulbs. Wiring and hardware included.
Features:
Specs:
Installation
These truck cab lights come with everything you need for an easy installation. The illustrated instructions include a handy template that you can use to drill holes for mounting the lights. And the wiring diagram walks you through every step to make sure everything operates as it should. The light bases conform to both flat and curved surfaces for a tight fit.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at Pacer Performance Hi-Five Truck Cab Light Kit. You can get these with incandescent bulbs using part number PP20-225, or with led bulbs, with part number PP20-226.These lights are designed to look like factory 1980 to 1998 cab rides for Ford vehicles. These lights will add a unique look to your vehicle, so if you're looking to stylize it to your taste, you can get that look you're looking for.LEDs typically last longer than your typical incandescent bulb as they don't have any filaments that can be broken or overloaded. The reason to use, you can either wire it up to your factory parking lights or you could use the included switched to have the option to turn it on and off whenever you'd like, even when your vehicle is sitting stationary with the key off.The light dimensions are 5 1/2", 3 1/2" wide, and 1 1/2" tall. On the bottom of each light is a rubber foam seal that'll help conform to your roof and keep out any moisture from entering the cab.And that completes our look at Pacer Performance's High-Fi LED Truck Cab Lights.
Average Customer Rating: 4.7 out of 5 stars (226 Customer Reviews)
Designed to look like the factory lights on 1980-1998 Ford trucks, these roof lights make your vehicle more visible to traffic and give it a big rig look. Amber lights come with white incandescent bulbs. Wiring and hardware included.Straightforward install. Worst part was dropping the headliner. Tapped into the power source at passenger side kick panel in my 97 Ford. Very happy with my purchase.
Perfect fit to replace OEM. Except i had to cut and solder pigtails as they would not fit the truck's connector and old pigtails wouldn't fit new lenses. That being said, this kit was set up to install on a truck that did not already have clearance lights and it appeared to have everything necessary to do that,
etrailer has a good price and quick trouble free delivery.
IF you're buying these as replacements for previously installed cab lights, be prepared to splice some wires. Other than that, they look amazing and are totally worth the extra work. They are identical to the factory lights except brighter and better!
Hail took out my cab lights on my 95 ford, these were a perfect replacement. Had to solder the pigtails as it is not plug and play replacement.
Changed out the broken clearance lights on my 97F350. Only thing I had to do was snip the original wire and then put a butt connector on. Screws lined right up with the blind nuts. Looks just like it did when Ford put them on the first time.
price was good and delivery was right on. reason for 4 stars not 5 is the package needed some tape, when it was delivered it was open but it looks like everything is sealed in a plastic bag inside. thank you!
They have been installed on a 1994 Ford F150 truck that we will give to our grandson on his 16th birthday. They look great and are just what he wanted.
Look factory correct and seem very well made
Excellent product, service & delivered quickly!
fit just like OME
fairly quick shipping..my truck has never had lights...but have installed them on every truck I've owned ( 4 ), This is my 5th. Everything was in the box. It even came with little washers for the screw heads. I used silicone just in case. I was very skeptical of the supplied ground wires but they all worked!!.. I decided on the old style bulbs this time. Might switch if they don't last then I will go to the LED's. I used a different toggle switch than the one supplied. Really like the set so far. I have never seen a truck like mine with cab lights. Maybe others will try it now?
Look good on the truck, one of the center lights became loose so it was not making great contact and therefore was out. I got it working again, but it was a hassle taking the light off the truck to just spin the light a little bit.
The cab lights I ordered came in a timely manner and they were oem quality!
Great product, I replaced existing lights with these. Hole pattern was exactly the same as my old lights. I had two issues not related to the product. My old lights only had one wire through the cab. They had a jumper wire that went from bulb socket to mounting screw for the light.
As far as replacing existing lights goes, this product is great.
For a complaint, the instructions nor video showed me what the little rubber washers were for. Since there were 10 of these I assumed they were for the mounting screws. I used mine for lens cover screws.
I also used silicone under foam pad, on top of foam pad, on mounting screws, and after install was complete I added it at base of lens and around base of light. All not needed but cant hurt to keep water out.
Definitely reccomend this companies products.
The Pacer Performance High-5 lights on my 1992 Ford F350 are high quality. They fit the original screw holes perfectly. The LED lights are bright. The wire connectors were different, but that was no problem. I cut off the connectors and used crimp-on connectors, then taped the connections securely with electrical tape.
One year on, these lights are holding up very well. Installation was pretty simple, I did have to break out a drill to enlarge the factory holes - I believe the factory lights used sheet metal screws to attach to the top of the cab through the lens and these use a metal stud attached to the light base with a nut that tightens from inside the cab (it's been a year and my memory is fuzzy). Outwards though these lights look completely stock. They sealed well and I've experienced no issues with water leaks. 100% suggest these to anyone wanting to replace or upgrade their stock lights to LED while retained the OE look.
Lights and everything arrived quickly, everything needed was in the packaging. The only thing I did differently was I wired the lights into my existing light switch instead of a separate switch, just bought 16 gauge wire from hardware store. I added some t10 LED lights which look awesome at night! During the day LED or incandescent bulbs are not very visible anyway. Overall awesome product!
They look great! Pretty simple install, everything you need is included and the easy splice makes it even easier to wire everything together. They give you 6, so I just used the last one to tap into my headlights and they turn on automatically whenever those are on. LED’s are pretty bright and that’s what I went with, but they also give you the classic bulbs to choose from as well. 4 stars for now just to see how they hold up!
Good set of lights , actually need another set. Very happy with them
After reading not so good reviews on other cab lights I found these and saw nothing but good things about them and when I had them installed I was more than happy with them. I would recommend to anyone wanting to put cab lights on their truck
The lights were purchased as replacement for the existing lights already on the truck, so all the hard work of drilling the holes and running the wiring was already done. What little installation I had to do was fairly easy, and simple. The lights match the originals exactly and you can't tell them apart from the old ones. The package was shipped promptly and arrived undamaged within a few days. Overall I'm extremely pleased with the order and I will be using your company for future purchases and I will definitely recommend your company to other people who need the type of things you supply.
I have ordered many times and have always had great experience!!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.