To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Designed to look like the factory lights on 1999-2002 Dodge trucks, these roof lights make your Dodge Ram Pickup more visible to traffic and give it a big rig look. Smoke lenses cover the amber incandescent bulbs. Wiring and hardware included.
Features:
Specs:
Installation
These truck cab lights come with everything you need for an easy installation. The illustrated instructions include a handy template that you can use to drill holes for mounting the lights. And the wiring diagram walks you through every step to make sure everything operates as it should. The light bases conform to both flat and curved surfaces for a tight fit.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the Pacer Performance Hi-Five truck cab light kit. Now, if you're looking at these, you're probably wanting to either replace or add some lights to the top of your cab on your truck. These are going to be styled after the 1999 through 2002 Dodge factory roof lights, but you don't necessarily have to put them on a Dodge. They are a universal fit and they give us that big rig look, also help us to be more visible to other drivers, especially during inclement weather, if we're going through a snow storm, foggy areas, a lot of rain or anything like that.
So it just helps to make our truck a little bit more illuminated and a little easier to spot as we're coming down the road.Now, the nice thing about this kit is that it does have the smoke lens over the light, so it gives that kind of blacked out murdered outlook for our trucks. So if that's what you're going for, this is going to be a great option for you. It also comes with everything you need to get this installed, including the little sockets that our lights are actually going to fit into, the wiring hardware and a switch. So we can bypass our factory wiring. And I'm going to get one of these setup to go.
It does come with the Amber LED or excuse me, Amber bulbs to get this installed.Now there is a kit that has LEDs with it and I would honestly suggest getting that kit since LEDs are typically going to last longer and be a little bit brighter than your incandescent bulbs, that kit is available here at etrailer.com, it's going to be part number PP20-244S and it's exactly the same thing, it just has the additional LED bulbs. So if that's something that you're into, I would highly suggest checking it out, but everything else about the kit is going to be the same.So I'm just going to plug this in so you can see what it looks like. My power wire is going to the red wire, ground goes to black, turn the light on, and you can see it illuminates there. I'm going to turn the lights out in the studio so you get a better idea of how bright that is. So again, not terribly bright.
The idea is not to give us more illumination while we're out on the road, it's just to make us more visible to other drivers. So I only could really light up one at a time, have to use your imagination for the other four, but that's basically what it looks like when it's all lit up.So whenever it comes to installing, you'll want to use one of the quick splice connectors to tie in with that bulk wire. It's just going to run between all five of our lights. And if you have that wiring run into your vehicle, you shouldn't have to worry about any kind of water getting in there and causing any damage. So the quick splices will do a fine job to get you connected.
And then we'll also have a fuse to come off the back of our switch. The other end of our bulk wire goes into that switch with those spade connectors. So there's little spades in the back. That's where we connect to that. Of course, if you want to, you can wire this in with your factory lights. It's really up to you there, but if you're putting this on a newer truck, there's a good chance that you could void your warranty by hard splicing into the wiring. So that's why bypassing it with that switch is a nice option and it does come with it.It doesn't have any hardware to get that installed. I've seen other kits that are similar to this, where it'll have two little machine screws that just slides onto, so you can probably pick those up just about any hardware store out there to get that all connected. Screws comes with to mount up our lights proper, also has some little rubber washers to help protect those from any water coming or seeping in underneath the head of those bolts. If it we're me, I'd probably still put a little bit of silicone sealant on the connection point into the cab, just to make sure that you're not getting anything coming into the headliner on your vehicle. You just don't want any issues down the road. So you will have to do some drilling, if you don't already have a light installed on your vehicle, that you're not. If you're not replacing anything, you're adding something new. So you do have to make some modifications there.As far as the size of each light, they're all going to be the same measures about five and five eights inches long by about three and an eight inch wide and about one and a half inch tall maybe one and three eighths inch tall. The distance between those two mounting holes is about one and three quarter inches apart center to center. Does have a little foam gasket to help this conform to any roof, whether that's curved or flat meets SAE specifications. The bulb type that this uses is an Amber one nine four, one ninety four type bulb. Again, you can switch those out for an LED. You can find a lot of options available here at etrailer.com or again, just to pick up that other kit that I mentioned before, but that's pretty much going to do it for our look at the Pacer Performance Hi-Five truck cab light kit.Hope this video has been helpful in deciding if this is the right kit for you. Thanks for watching..
Average Customer Rating: 4.7 out of 5 stars (227 Customer Reviews)
Designed to look like the factory lights on 1999-2002 Dodge trucks, these roof lights make your vehicle more visible to traffic and give it a big rig look. Smoke lenses cover the amber incandescent bulbs. Wiring and hardware included.
Had these lights on my truck for a year now and they work great the installation was pretty easy. I installed them on my ram 1500
Package arrived completely opened on one end, and the container a little tattered, but everything seems to be intact and complete!
fairly quick shipping..my truck has never had lights...but have installed them on every truck I've owned ( 4 ), This is my 5th. Everything was in the box. It even came with little washers for the screw heads. I used silicone just in case. I was very skeptical of the supplied ground wires but they all worked!!.. I decided on the old style bulbs this time. Might switch if they don't last then I will go to the LED's. I used a different toggle switch than the one supplied. Really like the set so far. I have never seen a truck like mine with cab lights. Maybe others will try it now?
Look good on the truck, one of the center lights became loose so it was not making great contact and therefore was out. I got it working again, but it was a hassle taking the light off the truck to just spin the light a little bit.
Great product, I replaced existing lights with these. Hole pattern was exactly the same as my old lights. I had two issues not related to the product. My old lights only had one wire through the cab. They had a jumper wire that went from bulb socket to mounting screw for the light.
As far as replacing existing lights goes, this product is great.
For a complaint, the instructions nor video showed me what the little rubber washers were for. Since there were 10 of these I assumed they were for the mounting screws. I used mine for lens cover screws.
I also used silicone under foam pad, on top of foam pad, on mounting screws, and after install was complete I added it at base of lens and around base of light. All not needed but cant hurt to keep water out.
Definitely reccomend this companies products.
One year on, these lights are holding up very well. Installation was pretty simple, I did have to break out a drill to enlarge the factory holes - I believe the factory lights used sheet metal screws to attach to the top of the cab through the lens and these use a metal stud attached to the light base with a nut that tightens from inside the cab (it's been a year and my memory is fuzzy). Outwards though these lights look completely stock. They sealed well and I've experienced no issues with water leaks. 100% suggest these to anyone wanting to replace or upgrade their stock lights to LED while retained the OE look.
Lights and everything arrived quickly, everything needed was in the packaging. The only thing I did differently was I wired the lights into my existing light switch instead of a separate switch, just bought 16 gauge wire from hardware store. I added some t10 LED lights which look awesome at night! During the day LED or incandescent bulbs are not very visible anyway. Overall awesome product!
The Pacer Performance High-5 lights on my 1992 Ford F350 are high quality. They fit the original screw holes perfectly. The LED lights are bright. The wire connectors were different, but that was no problem. I cut off the connectors and used crimp-on connectors, then taped the connections securely with electrical tape.
After reading not so good reviews on other cab lights I found these and saw nothing but good things about them and when I had them installed I was more than happy with them. I would recommend to anyone wanting to put cab lights on their truck
The cab lights I ordered came in a timely manner and they were oem quality!
They look great! Pretty simple install, everything you need is included and the easy splice makes it even easier to wire everything together. They give you 6, so I just used the last one to tap into my headlights and they turn on automatically whenever those are on. LED’s are pretty bright and that’s what I went with, but they also give you the classic bulbs to choose from as well. 4 stars for now just to see how they hold up!
The lights were purchased as replacement for the existing lights already on the truck, so all the hard work of drilling the holes and running the wiring was already done. What little installation I had to do was fairly easy, and simple. The lights match the originals exactly and you can't tell them apart from the old ones. The package was shipped promptly and arrived undamaged within a few days. Overall I'm extremely pleased with the order and I will be using your company for future purchases and I will definitely recommend your company to other people who need the type of things you supply.
Purchased and installed the cab lights from etrailer.com. Shipped quickly, reasonably priced and a very easy installation. They look great on the truck. There some great write ups on the web explaining how to easily drop the headliner. Thanks etrailer.
Good set of lights , actually need another set. Very happy with them
Bought these lights about a year ago and they look and work great! The lighting makes a perfect red and they are very bright as well, but that can depend on the bulbs you decide to use. Easy installation too!
Great lights looks amazing on my GMC, i could not be happier. I had the installed as no one wants me wiring anything. The LED bulbs are nice and bright. I would recommend these lights to anyone.
I have ordered many times and have always had great experience!!
Lights exactly as described. Package came with both LED bulbs and incandescent bulbs. Easy to install. I watched the installation video which was very helpful. I only installed 4 as my vintage truck has a middle rotating beacon.
The smoked lens look great! On my 2017 black 3500 RAM. Install took about 45 minutes. LED bulbs need to go the right way to work. Shipping was quick, and thanks to Jason and everyone at etrailer for making the ordering process easy.
Straightforward install. Worst part was dropping the headliner. Tapped into the power source at passenger side kick panel in my 97 Ford. Very happy with my purchase.
These have only been on for a few days but they seem to be a very reliable option if your truck needs cab lights. Straight forward install and I was pleased to find out the bases and lenses are molded of a nice poly plastic. I was worried the bases would be weak and flimsy. I ordered two sets, one set for a 2000 f350 that never had cab lights, and a second set for a 2002 f350 that already had cab lights but were aged and weathered. I was able to get my drilling dimensions from one truck and just transfer over to the other. Simply dropped the headliner, marked my holes on masking tape, drilled holes, mounted lights, and ran wiring down to behind my headlight switch tapped into the running lights wire. I did go the extra mile and added some silicone around my bolt and wire holes for a little extra insurance prior to putting the headliner back in place. I was a little intimidated to start with but after all said and done I would have no issue doing this over again on multiple trucks. I'm not a professional mechanic by trade, just handy enough to do my own exhaust, stereo, and lighting installs as well as oil changes etc. These cab lights can be installed by novice wrench turners. etrailer does however need to update their website pictures though. The updated version of these lights have studs molded into the bases so they are held on by a nut and washer from inside the cab. The pictures on etrailer must be a previous version that were fastened by sheet metal style screws screwed in from the topside. Pacer Performance website shows the proper product, etrailer should make that a priority to follow suit and update their literature. The molded studs is a much better design! Kudos Pacer Performance!
Look just lock factory
Excellent product. Very good price. The replacement marker lights were almost an identical match to the original lights on my 1983 Ford F150. A very easy install. The truck looks great! Purchasing the lights on line with etrailer.com was a snap. I'm very happy so far with the service, product, and follow up. I'll definitely consider etrailer.com for further purchases as I work to restore this pickup. Thank you etrailer.com!!!
Hello Again. I just received my order. Thank You. One concern. The exterior marker lights came as a complete set including mounting screws although the three interior lights and the exterior door light DID NOT. I was hoping the screws would be included in the price so I would not have to make a trip to the hardware store to mount them.
The diameter, head size and length are critical to NOT breaking the unit when installed. I look forward to hearing from you on this matter.
Thanks, R.S. Moyer
Very well made cab lights. My only suggestion would be to buy a better set of led bulbs and swap them before installation. I had bulbs that burnt out after 9 months.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.