Provider ST235/80R16 Radial Tire w/ 16" Silver Dual Wheel - 5.35 Offset - 4.77 Pilot - LR G

Taskmaster Trailer Tires and Wheels - A16R80G477

Radial tire has a 14-ply rating and 3,640-lb max load at 110 psi. 16" Hub-piloted, dual steel wheel with offset has an 8 on 6-1/2 bolt pattern and 4.77" pilot hole. 3-Step powder coat finish. Complimentary roadside assistance included.

Features:

• Tire-and-wheel assembly is designed for use on dually trailers
  • Wheel offset allows assembly to be used as either the inner or outer wheel of a dual-wheel setup
• Heavy-duty steel wheel is sturdy and corrosion resistant
  • 3-Step finishing process includes zinc phosphate bath, e-coat primer, and silver powder coat on both sides of wheel
• Center disc is spun-formed from fine-grained steel and welded into place for strength and durability
• Hub-piloted wheel requires the use of flange nuts (sold separately) for installation
• Radial tire is constructed with double steel belts and double polyester cords for a long life
  • Great for highway use
  • Nylon tread-firming belt overlays help prevent tread separation
  • Tread depth bars offer a quick visual indicator of tread wear
  • Tread is regroovable for additional mileage (federal and state laws may apply)
  • Bake tested to ensure that the rubber holds over time
• Special trailer tire design couples the strength of a bias tire with the durability and stability of a radial tire
  • Created specifically for trailers and not intended for use on other vehicles
• 2-Year Platinum Plus warranty includes emergency tire change service and other benefits
• Assembly meets DOT specifications and exceeds FMVSS

Specs:

• Rim dimensions: 16" diameter x 6" wide
• Bolt pattern: 8 on 6-1/2"
• Lug nut size: 5/8"-18
• Wheel capacity: 3,860 lbs
• Pilot diameter: 4.77"
• Offset: ±5.35"
• Tire size: ST235/80R16
  • Section width: 9.3"
  • Outer diameter: 30.8"
• Tire capacity:
  • Load range: G
  • Ply rating: 14
• Maximum load (dual tires): 3,640 lbs at 110 psi
• Tread depth: 11/32"
• Maximum speed: 81 mph (speed rating M)
• 2-Year limited warranty

Platinum Plus Warranty with Roadside Assistance

This tire-and-wheel assembly comes with a Platinum Plus warranty that includes complimentary roadside assistance for 2 years. If your trailer has a flat tire, call the help line and a technician will come change out the flat tire with your existing inflated spare tire. The service is available 24 hours a day, 7 days a week. In addition to the roadside assistance, this warranty also includes other benefits and services.

Built-In Offset for Dual Applications

This tire-and-wheel assembly is designed to be used in dual-wheel setups. The 5.35" offset allows the wheel to be positioned closer to the trailer frame when used as the inner wheel of the setup. And if you use this assembly as the outer tire and wheel, the offset ensures that it will sit closer to the outside of your trailer. This hub-piloted wheel centers on the hub, not the lugs, and it requires the use of flange nuts (sold separately) for installation.

Corrosion-Resistant Finish

The steel wheel goes through a 3-step finishing process that makes it both attractive and corrosion resistant. The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and finished on both sides with baked-on DuPont powder paint.

Provider Radials

Provider radials are constructed with double polyester cords and double steel belts for increased durability and endurance. A protective layer of nylon is wrapped around the steel belts to help prevent tread separation. Provider radials are bake tested - a process usually reserved for automotive tires - to ensure that the rubber holds up over time.

The standard tread on this tire has solid, continuous ribs, and there are very few sipes (or thin grooves) cut into the rubber. This tire is designed for use on trailers, so it doesn't require the level of traction that would be needed on a vehicle that is braking or steering.

Radial Tires vs. Bias Tires

Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip. This construction prevents the cords from rubbing against one another when the tire flexes, unlike the cords on a bias ply tire. As a result, radial tires have less rolling resistance and heat buildup, which leads to a longer tread life and improved steering at higher speeds.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

A16R80G477HDM Taskmaster Provider ST235/80R16 Radial Tire with Silver Dual Rim - 5.35 Offset - 8 on 6-1/2 - Load Range G

Replaces A16R80G477 and A16R80G477HD

Installation Details