Summer Starts Here - Save up to 70%
Hanger set includes 1-1/2" tall front hangers and 7/8" tall rear hangers for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Shackle straps, bolts, and components for mounting axle to springs sold separately.
Features:
| Leaf Springs | A - Distance Between Hangers | B - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
|---|---|---|---|
| SP-169275 (1020) | 20" | 4-1/2" | 1-3/4" (typical 2,000-lb trailer axle) |
| SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) | 24-7/8" | 4-1/4" | 2-3/8" (typical 3,500-lb trailer axle) |
Note: The above table provides an indication of where the included hangers can be mounted on your trailer. The distance between the hangers may vary depending on your specific application. Be sure to verify proper positioning before welding.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Dexter single axle trailer hangers for the 1-3/4 inch wide double eye springs on 2,000 pound to 7,000 pound axles. Now, this hanger set here will include the front hangers and the rear hangers, and it's for mounting your lease springs to the 2,000 pound to 7,000 pound single axle trailer frame. It includes the two 1-1/2 inch tall front hangers. Now when we talk about the height on the hanger, it's not the overall height from the bottom to the top. The height of a hanger will always be measured from the center of the bolt hole to the top.
So on this one, if we do center to the top, you can see there it's 1-1/2 inch measurement and these are the two front hangers. The rear ones are 7/8 of an inch tall and it's the same way center of the bolt hole to the top. So if you put that on it, it's just 7/8 of an inch tall rear hangers. And if you notice, it does have the steel bushings in it. Now, the shackle straps, the bolts, and the components for mounting the axle to the springs are all sold separately.
This kit here will attach two 1-3/4 inch wide leaf springs to your trailer frame. What I do recommend is if you go to this product page, use the table that's listed on the product page to determine the hanger location based on the type of leaf springs you're using. And when you do install this with the leaf springs, it will achieve 4-1/4 inch or 4-1/2 inch clearance between the trailer frame and the axle depending on the axle size that you use. But that should do it for the review on the Dexter single axle trailer hangers for the 1-3/4 inch wide double eye springs on the 2,000 pound to 7,000 pound axles.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Hanger set includes 1-1/2" tall front hangers and 7/8" tall rear hangers for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Shackle straps, bolts, and components for mounting axle to springs sold separately.Parts arrived fast and in excellent con dition.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.