Replacement "C" Solenoid Coil for Meyer Hydraulic Actuated Snow Plow - 5/8" Bore

Video Transcript for Review of SAM Snow Plow Parts - Snow Plow Replacement Parts - 3371306060

Today we're going to take a quick look at the "C" solenoid coil 4-way with 5/8" bore for Meyer snowplow. Now whether you have an old one that needs to be replaced or you just want to have some extra parts on hand so you're never caught out in the snow, this is going to get you back out on the road and plowing effectively. Our solenoid is going to act as a connection between our snowplow and our battery to make sure that everything is working properly.We'll have our green cord coming off the back to connect. That cord is going to be about 13-1/2" long with a male bullet end, and then our solenoid housing itself is about 2" tall overall and about 1-5/8" in diameter. It has that 5/8" bore in the center at the bottom. Again, this is going to be compatible with the hydraulic unit on your E-47 and E-60 Meyer snowplow.

It's going to be a direct replacement for your "C" solenoid coil. This product is also made in the U.S.A.That's going to do it for our look at the replacement "C" solenoid coil 4-way with 5/8" bore for Meyer snowplow.