To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.
Features:
Thule SquareBar Evo Crossbars - 53" Long - Steel - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, John with etrailer. Okay, so you have your Telluride, you have the third row seating, and you still need more room. Here's a popular accessory. This is the Thule Roof Rack System. It's going on our 2023 Kia Telluride. One of the reasons I like this system so much is just maybe, for this, you can throw a roof box up here and gain a ton of space inside your vehicle.
A lot of times if you're traveling, your hitch is already gonna be used either towing the trailer or if you have a bike rack or something back there. It's easier to load bikes on the back than up on the roof. But, this system can take a bike rack as well. Can also load kayaks up there. All right, so the crossbars come in black.
They also come in silver, so it's gonna give you a couple of different color choice combinations. They are 53-inch crossbars. They're gonna add approximately 4 inches of height from your rail up to the top up here. If you have T-slot accessories, this is something else I like. You just flip this forward and you have access to the T-slot here.
So another feature that I like is the noise or wind noise. These crossbars are pretty aerodynamic. Everything touching your Telluride is gonna have a rubberized surface, even the coatings down here. Now, if you would prefer to have a little bit more security, we do have lock cords available. So you could actually lock these crossbars to the Telluride.
Now this system is super easy to install. It'll take you maybe 30 minutes. You can do it in your garage. You can do it on your driveway. If you wanna see how we did it, stick around. All right, so to begin the install here, we've already got one of the crossbars installed. So that's gonna be our end result. What we can do right now is show you how to assemble the crossbar. We're gonna have everything here that came in the kit. You have the feet, you've got the crossbar itself, the end caps, then you have the custom fit kit here. Also, this is a torque tool. It's really an Allen head but it'll torque to a specified setting so that we know that our feet are on tight. So to begin with, we can assemble our feet. We're gonna grab one foot here, and this is gonna be the top section. These parts on the fit kit actually are stamped A and then C. So go ahead and grab A. I'm gonna slide that over the tabs, like that. We'll take one of the feet, and then just snap in to the bottom of it, like that. And then you could take part C here. We're gonna go over the hook, and then we'll have the screw exposed there. Then take, you have a threaded end on this nut. And then you have the hex head end, which the tool's gonna insert into. So we'll take the threaded end and just spin this on about two rotations or so. And essentially, this foot's complete. We'll go ahead and repeat that for the other. Now with our feet assembled, we're gonna go ahead and install them on the crossbar. We can take the crossbar. Underneath you'll see that it has a T-slot, and the top of our foot has the metal and the two plastic fittings on top. This will actually just slide in, like that, and it's a good time to go ahead and put our end cap on, (end cap clicks) like that. We'll go ahead and repeat this on the other side. With the crossbar assembled with the feet, we'll go ahead, and we can swing this up and over it. Be good to have an extra set of hands, but these are pretty light and it's not too bad to handle. And we'll set these on our rails. Now, I marked with painter's tape on the car the minimum distance that Thule recommends to have these crossbars set up. We can see how the different widths are gonna affect it. If you have different accessories, you can move 'em back and forth. Just make sure that you don't go any closer than the minimum recommended distance. So once we have it set up here, everything is still loose. You can see the crossbar is able to move left and right. So you'll gonna want to center this. You can get a tape measure or just eyeball it. We're gonna go ahead. Set it in here. This should be pretty good. So once you're satisfied that you're equal both left and right, and forward and backwards, we can go ahead and tighten it down. And this system is pretty good. You'll insert the provided tool, and just start spinning clockwise. Now, this motion is gonna tighten both the clamp at the bottom and the crossbar itself all in one. That's what I really like about it. Once you have it snugged on one side, come around to the other side and just go ahead and do the same thing. You don't wanna fully clamp one side and still have the other side loose. So with both sides snugged, we'll come in for a final torque. And again, this tool is gonna do all the work for you. It will simply just click, kinda like your gas cap when it's reached the recommended torque that Thule wants. (clamp clicks) Now once you have all four feet torque down the specifications, then we can put our end caps on. You'll see that this has a flathead screwdriver and you'll turn it to lock it on like that. So in order to put it in, will be horizontal. Go ahead, match it up there, and give it a quarter turn so that it's vertical and it's locked on. And that was a look at the Thule Roof Rack Kit on our 2023 Kia Telluride.
Average Customer Rating: 4.8 out of 5 stars (331 Customer Reviews)
SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.Easy to assemble and install. Love the way etrailer packages everything you need and they all are correct for the vehicle you are mounting them on. Once installed they appear very strong. Installed on a 2023 Chevy Tahoe and did not interfere with the sunroof.
Very sturdy. Works well. The attachment to the roof rails on my 2023 chevy suburban works well. The "C" clamp design mechanism holds it tightly and securely in place. No fear of anything coming loose and falling off like other racks I have tried to use.
About a year ago we purchased two Thule Hullavator Pro kayak racks along with a Thule SquareBar Roof Rack for mounting. The combination worked out very well and we headed from Colorado Springs to Duvall Washington outside of Seattle with three stops along the way to kayak. The trip went smoothly and we appreciated the Hullavator ease lifting the boats. We have two more trips planned in the near future. We did mount the boats with cockpits down to avoid filling with water when traveling without a problem.
Standard crossbars, very strong and ver satile.
I ordered the Thule WingBar Evo Crossbars - Aluminum - Silver - 50" with the Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet for my 2020 Mazda CX9. I appreciated the product selector to make sure I was getting all the correct parts. I was happy with the products, but I did run into an issue where 1 of the rail feet had a defective bolt which required a replacement. I was very satisfied with etrailer's customer support, and how well they worked with me to get the part replaced quickly. I'm giving this a 4 start only because of the hassle of receiving a defective one initially
Favorite bar Thule makes. Super solid.
I've had the roof rack for a year now and we only use it sporadically in the winter to put the ski box ontop of the car but it works great. Very easy to install and remove and very sturdy. Previously I had the kind that bolted into the roof of my SUV and had a terrible experience with that (we lost the rack and kayaks on the freeway and it tore holes in my roof). The clamp style is the only kind we'll get from now on because they are much sturdier and no risk of losing them. Definitely recommend them.
Once the mounting kit was installed, the fit was great. Too expensive though. etrailer ordering and shipping process was fantastic.
These bars are great and work fine. However the connection slots are not long enough to allow the 60” bars to work on our grand Cherokee. The 60” bars would give more clearance for our Thule Hullevators when they are in the lowered position. I had to develop a removable pad system to protect them from hitting the side of the car.
Easy to install. Super-fast shipping. Quality product. Glad I shopped with etrailer.
Solid roof rack, but get help from etrailer to make sure you get the core feet.
Very pleased with order. Shipped fast, not damaged, all parts accounted for. Easy install, very sturdy, and attractive design. Slight wind noise but that was expected compared to not having a roof rack.
Excellent product. Arrived when promised. Very pleased. Thank you.
This is the first top of the line roof rack system I have purchased. I never expected to have issues but this thing is so universal, with gaps everywhere, that I can’t get it to stop whistling. I wish I could return and get my money back. I really expected something better from such an expensive system.
Fit my 2015 Kia Sorento perfectly
Well packaged, arrived in good condition. Works as expected. Would be great to have additional fitment information available. The underside channels of the 53” bars were just barely long enough to fit Leer cap track system spaced 40” apart using the rapid podium feet (phew). Thought from the measurements there would be some room to spare but didn’t account for the angle of the podium feet.
Website is easy to use & is better at putting together the correct package than Thule’s site.
etrailer had all the parts in stock for my 2020 Kia Telluride.
Payment process was simple.
Received periodic updates from staffer on my order & could actually reply if needed.
Installing the roof rack went well. Estimate start to finish was about 2 hours. Found it best to really examine each diagram in Thule’s step by step instructions to get it all right on the first try.
Hardness part of the installation was getting the crossbars installed at the proper distances. A tailor’s soft measuring tape & some masking were great aids.
It was hard to know what to order. We ordered 2 kits and thought that would hook up to our roof top. But no we needed a 3rd kit. I guess some people only need repair kits. It would be helpful to have one complete kit and then other parts needed for things like a repair job. Was not very had to assemble once we had everything.
Thule Rack looks awesome on my Kia Telluride. Products took a while to get to me because they were on backorder but it's not etrailer, they were on backorder everywhere. I messed up one of the pieces of rubber while installing and etrailer sent me a new one at no charge. Definitely recommend etrailer.
Classic square bar, but modern integration with the podium feet. Exactly what I was looking for.
I spent a whole weekend looking for all these parts - no one had the entire kit in stock, they had one but not the other. I stumbled upon etrailer.com and was blown away by how easy they made the shopping experience - entered my vehicles info and they told me exactly what I needed! It doesn’t stop there, they also shipped my items within 3 days of ordering. I will definitely use them again when the time comes and recommend you do the same.
So far so good! The ease of installation was incredible. Pop the fit kit together, put it on the bar and install. Everything is straight forward with the directions. Its even easier if you find a video of the installation. The rack definitely has a little bit of a whistle to it but its kinda expected when you disrupt the airflow. I'm going to pick up my new kayak tomorrow and couldn't be happier! Not the best photo but its all i got at the moment lol.
I’ve had it on my 2021 Kia Telluride now for a few months and it works great. When I was mounting the forward bar, I opened the sun roof to make sure I was comfortable with the roof window and bar clearance.
I am very pleased with my purchase, great prices, great quality parts, and excellent customer service.
Worked great on my 2015 Dodge Grand Caravan's naked roof. Carried fully loaded car topper over 8,000 miles without needing any adjustments. Easy to install. Created a significant amount of whistling/howling when driving without a topper, so I wrapped a bungee cord around the front bar and secured it to the Thule feet. Voila. No more noise.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.