Blazer Off-Road LED Light Bar - 4,800 Lumens - Flood Beam - 20" Long

Video Transcript for Review of Blazer Off Road Lights - LED Light Bar - BL92VR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Blazer 20 inch long off-road wide view LED light bar with the flood beam pattern. Now, this is a wide view LED light bar. It's in a durable aluminum housing and it produces a nice bright white flood beam. Gives you a super wide 170 degree beam which will illuminate a large area to provide ditch-to-ditch visibility. So it is ideal for off-road industrial, commercial, and even agriculture applications.

Now, I do have this hooked up to some 12 volt power and we're gonna turn the light on just to show you how bright it is and the super wide beam that it does give off. So we'll go ahead and first turn on our power. You can see the LEDs come on. We'll go ahead and turn off our overhead light and you can see how bright it is. If I pick it up, you can see it gives off a nice wide pattern, very bright, gives you a superior light output from a single row of multiple LEDs.

Do wanna give you a different angle. What I'm gonna do is move this around to the end of my table and shoot it on the further far wall. So if I shoot it this way, it's about seven, eight feet away. You can see how much area this lights up, how wide it is. Raw lumen output is 6,000 lumens.

Effective lumen output is 4,800 lumens. Color temperature on this is 6,500 Kelvin and the power draw is four amps. We'll go ahead and turn back on our overhead lights. Turn off our power. It is a durable waterproof construction.

The housing is a nice black powder coated aluminum housing. It's very lightweight and rustproof. The lens on front here is a tough polycarbonate lens. It is IP67-rated to protect against dust and moisture. And this light is compatible with 12 volt and 24 volt DC systems. And it is a very simple installation. Comes with the included mounting brackets which I've already installed on the end of the lights and the hardware to install everything. The light can mount to your roof, your roll ball, your bumper, even your grill guard to give you a nice rugged look. And what's nice is these brackets here, these will let you change the angle of the light as needed. So if you need to shoot it down more, you just turn it and it'll shoot it down at an angle. If you need it out more, just turn it that way. Once you get it where you want it, have this included Allen wrench that you can just tighten it down and it'll hold it in that angle. Now, this light is EMC and EMI certified to not cause any frequency interference with other electronic products. Last thing I wanna do is give you some dimensions on this. We're gonna first do the overall dimensions. And when we do the overall, we're gonna measure including the feet on the mounting bracket down here. So if I take a tape measure, we go from the end of this one to the end of that one, you can see is right at about 23 inches long. The height on this is gonna be right at about 3-11/16 inches tall. The depth on it is right at about 1-9/16 inches deep. Now just the light bar, not including the mounting brackets, we're gonna get an overall length of right at 21-1/2 inches long. The height on just the bar, 2-1/2 inches tall. And, of course, the depth will be the same, 1-9/16 inches deep. But that should do it for the review on the Blazer 20 inch long off-road wide view LED light bar with the flood beam pattern.