Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Aiden here with etrailer. Today we're gonna be taking a look at and showing you how to install the Weather Tech no drill mud flaps for your 2022 Ford Maverick. Now there's gonna be a set, we've got the front ones installed right here but if we go to the back of the vehicle, we've also got a set for the rear. So it's gonna be full coverage for your vehicle, both sides, obviously, we've got the passenger side installed right now and it's gonna be the same process on the driver's side. It's gonna give us a nice layer of protection to make sure we're not kicking up rocks and hitting the back of our vehicle. Let's check 'em out.
Now this is gonna be a rigid mud flap. You can see, knocking on it right now, that there's really not any movement here. It's a pretty firm structure. It's custom fit for the Maverick, so it follows the contours of our vehicle all the way up to here, even, where we've got a small divot and matching this indentation between the plastic piece and the body panel moving up to the top. So it's a nice custom fit on both sides, the front and the rear, and it uses factory mounting locations for the install.
It's gonna be a thermoplastic resin material, keeps it nice and sturdy and UV resistant. It's gonna be very similar in color to the black plastic that's already on your Maverick. My truck here is a little bit dirty right now, but if it we're cleaned then this would match quite nicely so it blends in and you really don't notice 'em as they're on the vehicle. And like I mentioned before, it comes with the front and the rear. And the installation process for both is gonna be very similar.
There is some minor differences in what pieces we're gonna be removing from the factory hardware on the front and rear, but we'll cover all those differences in the install. So let's check out and see how we did those. We're gonna start our installation on the front end of the vehicle in the wheel well here. There's gonna be three push-pin fasteners we need to remove, one at the bottom right here, one in the middle, shortly above that, and then up a little bit above this divot, one right there. It's just the first three from the bottom.
Take a trim panel tool, that's gonna be the most helpful for this. Pop the middle part up and then pull it out by the base and repeat that for the other three locations. We can then take the fender liner and pull it back. Now on these two metal tabs for the middle and the top mounting holes, we're gonna have some clips to install that come in your kit that look just like this. Pop those onto the tabs so that we can thread into them. We can then take the mud flap. RH is gonna be passenger side, LH will be driver's side. You can see that the back here, we've got a bunch of contours. They're gonna match up to the wheel well here, particularly this extrusion here will match up with the indent on the wheel well and the fender liner right here. So it's easy to tell what matches up to what, put it in place and secure it down. The top two locations are gonna get new screws provided in your kit that'll be tightened down with a six-millimeter socket, let's get those started and threaded in. And then the bottom hole's gonna get one of these push pin fasteners new in your kit. Just pop that in, then push the center section down to expand and secure it. Now the rear mud flap is gonna be much of the same process, a little bit different in the hardware, though. The bottom two locations are going to be factory screws. Remove those with the exact same socket as before and then we're gonna save those for re-installation. And then the top mounting location is another one of those push pin fasteners that we'll need to remove. Much like we did on the front, that one top location is going to get one of these clips that lines up over the hole. Put the fender liner back in place, grab the appropriate mud flap for that side and then use the new screw provided in your kit for the top hole and those factory screws for the middle and bottom holes. And once that's in place, I always like to shake 'em, just make sure that none of the mounting locations are loose, checking that I'm getting a good fit all around the shapes of the vehicle. And once I've verified that I am, you can repeat that process on the other side. And that'll complete our our look at and installation of the Weather Tech mud flaps for your 2022 Ford Maverick. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (1380 Customer Reviews)
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Good quality. Arrived quickly
Easy to install.
Weather tech always fits and looks good
Fit my 2020 Honda Ridgeline perfect! Easy to install with easy to follow instructions. Match oem black plastic great. Really complete the look of truck. Very happy customer.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
I ordered a set of weathertech no drill mud flaps for my new 2022 Colorado and they fit great and easy to install. Well after a couple of weeks I put on GM flares so I had to order another set for flares. Same thing excellent fit and easy install. Quick shipping and good service.
Good service and product from etrailer, and the mud flaps fit was exact, no issues and easy to install.
Seems like a solid product. Made in the USA. The instructions were a bit off. So I jumped on the etrailer YouTube account, found the install video. Issue solved. I will say I'm more impressed with etrailer than weathertech. However, nice fit and finish. I would recommend this product.
Easy to install great product
If anyone wonders how difficult these mud flaps are to install. You have no need to worry, it doesn’t get easier to install the weather tech mud flaps.
Protect your vehicle in a matter of 30 minutes!
So easy to install.
Excellent service,I bought a few things on here and I was very happy with the products, Staff always kept in touch either by phone or e mail. And not only that, They also sent the installation instructions for the parts that I have ordered for my 2014 Chevy by e mail. Thank you.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.