Tall LED Beacon Light - Surface Mount - 12 Flash Patterns - Amber Lens

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 337SL696A Review

Speaker 1: Today, we're taking a look at a 12 LED beacon light. This beacon light features 12 LEDs and 12 flash patterns to keep your vehicle visible on the road. It's SAE J845 Class 1 certified, and CA13 rated. Now, LEDs are designed to make great replacements for incandescent lights. They last longer, they burn brighter, they're more efficient. With LEDs, you don't have to worry about replacing bulbs, or worry about brittle filaments.

This unit has the amber colored lens with the black plastic base.Now, permanent mounting is available with this unit, so you can use the three hole design and included hardware for permanent mounting. It also has a threaded connection point right here for attaching the unit to a one inch threaded pipe. It also comes with a foam gasket. That's for mounting, so that would go under the light. Provide a little bit of cushion between the light base and the installation surface.Now, there's a three wire design on this unit.

The wire ends are exposed for hardwired applications. Your black wire is your ground wire. Red is your power wire, and the yellow wire is for synchronizing and flash pattern selection. Multiple lights can be connected together. If doing that, you want to refer to the included instructions, and to select your flash pattern, you just apply power to the yellow wire.

Once for pattern selection or next pattern, and then quickly three times for reset.When it comes to the measurements of the unit, the overall diameter at the base is six and five eighths inches. Overall height is six and seven sixteenths inches tall. Again, it contains 12 LEDs or 12 diodes. It also has 12 flash patterns. Voltage is 12 to 24 volts, and amperage is 2.7 amps at 12 volts.

We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it, and I will cycle through all of the flash patterns for you.So, the one that we're starting out with is the solid selection or option. I'm going to touch it to power. And we'll go through all 12, so this is number one. Number two. Three. Four. Five. Six. Seven. Eight. Nine. Ten. Eleven. And twelve. Now I'll do that with the lights off. Again, we have solid. This would be number two. Number three. Four. Five. Six. Seven. Eight. Nine. Ten. Eleven. And twelve. And then if we touch again, it'll go back to solid. Now, this has light 360 degrees around the unit. That's going to do it for today's look at the 12 LED beacon light.