Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

Video Transcript for Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 43595 Review

Today we'll be taking a look at part #43595, this is the Hopkins plug-in. Simple vehicle wiring harness with a full-pull flat trailer connector. This product is going to fit your 2000 to 2004 Nissan Xterra, it's going to provide the four way flat connector in the back of the vehicle to power your trailer signal lights. This is compatible with 5-pull, 6-pull and 7-pull adapters, adapters are sold separately. It does include the dust-cap, that way you can cover it up those connection points when your plugs not being used. This is going to use original OEM connectors for water-type protection, and guaranteed fit and a factory look, very simple installation with this product, you don't have to worry about cutting or splicing any of your wires. It's going to come with very detailed instructions to help walk through the installation process step by step but all you have to do is look at the connection point behind the bumper. This plug is going to match up perfectly with the plug on your vehicle, so you just plug in the connector, it's going to snap-lock together for a nice tight secure fit and then it's going to come with a couple zip ties, that way you can secure any excess or slack in the wiring. Once your installation is complete, the four way connectors is going to be stilled beneath the vehicle, you can loop it around the safety chain loop at the hitch or you can use a mounting bracket.

Mounting brackets are sold separately but that is recommended to help keep the connector secure. It's going to come with a terminal grease packet. It's always a good idea to apply a small amount of grease to all your electrical connections, that's going to help prevent corrosion. That's going to do it for today's look at part #43595.