Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(15 reviews)
Price: $77.43
In Stock
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # HM11143495
Retail:$122.49
Our Price: $77.43
You Save: 37%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (15)
- Q & A (0)
- Photos
Hopkins Custom Fit Vehicle Wiring - HM11143495
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Hopkins
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in connector
- Run hot lead to car battery
- Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Protective connection terminals resist corrosion
- Comes with dust cap for 4-way flat connector, cable ties, and terminal grease packet for electrical connections
- 90-Day limited warranty
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the rear threshold, some interior paneling, and the tail light assemblies to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery. Connect the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Powered Tail Light Converter
A tail light converter is built into this T-connector. This converter is a battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
11143495 Plug-in Simple Hopkins T-Connector with 4-Pole Trailer Connector
Installation Details
This Product Fits The Following Vehicles
- 2011 - 2014 Toyota Sienna
- 2011 - 2011 Toyota Sienna
- 2012 - 2020 Toyota Sienna SE
California residents: click here
Customer Satisfaction Score:
80% were satisfied with this product
20% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - HM11143495
Average Customer Rating: 4.9 out of 5 stars (15 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.by: Roy 12/01/2023
simple install and works flawlessly.
by: Travis06/06/2021
Received the wrong wiring harness. The one I first received was for the Sienna SE, not the XLE. Costumer service sent me the return label and the correct wiring harness. Once I received the correct one the hardest part was finding a good ground. I think I wired it to the jack mount and put the control box in the same cavity. The wires come out of the hole in the plastic next to the trunk latch. It works great!
by: Adam 08/27/2022
2011 Toyota Sienna
Tried to mount module on right side of trunk but left side light wire was the short one so had to cut and resolute the left and right side light harnesses and the wire provided for getting to the battery was to short but otherwise worked fine. 2011 sienna xle.
by: Ralph 02/26/2021
Great product
by: Luis05/20/2022
2018 Toyota Sienna
Order arrived before the due date, was very well packaged, no damage to anything,am very impressed!! Thank you!!!
by: Joe A05/23/2021
Very knowledgeable and excellent service. I would definitely recommend it to my friends.
by: Ellen 02/04/2024
by: Sam 05/11/2023
by: Pual08/02/2023
by: Austin 01/26/2023
by: Birute08/27/2020
2019 Toyota Sienna
ok
by: Jerzy07/17/2021
by: James 09/14/2022
by: Kyle04/24/2022
2017 Toyota Sienna
by: Aneury04/23/2022
15
15
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- Recommended Trailer Wiring Harness For A 2012 Toyota Sienna XLEThe Hopkins # HM11143495 that we have available for a 2012 Toyota Sienna is designed only to fit the SE (Sport Edition), so I will need to steer you in a different direction, unfortunately. For your XLE (Executive Luxury Edition), I recommend going with the Tekonsha T-One Vehicle Wiring Harness # 118498. This will need one wire run up to the battery for needed power, but other than that it will be a relatively quick plug and play option. I have found Tekonsha wiring harnesses to be the...
view full answer... - Recommended Wiring Harness for a 2015 Toyota SiennaIf the Hopkins # HM11143495 isn't matching the plugs on you 2015 Sienna, it may be due to this only fitting the SE trim package. If you do not have the SE trim package, you will need the # HM43494. That being said, I did include pictures of the plugs for you to double check and make sure they do match.
view full answer...
- Can Trailer Wiring 4-Way Connector be Mounted Next to Receiver on 2011 Toyota SiennaYou can definitely route the 4-Way from the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143495 through the grommet on your 2011 Toyota Sienna so that it can be mounted near the hitch receiver on your vehicle. I prefer to have it mounted by the receiver for easier access, but if someone doesn't do much towing then storing the connector in the rear cargo area of the van will keep it safer from the elements. To keep the 4-Way hanging near the receiver you can use the Mounting Bracket...
view full answer... - Do All Trailer Wiring Harnesses for 2011 Toyota Sienna Store in Rear Cargo StorageEach of the trailer wiring harnesses that fit your 2011 Toyota Sienna are designed to store in your trunk/rear storage area when not in use - the Hopkins Vehicle Wiring Harness # HM11143495 and T-One Vehicle Wiring Harness # 118498. You may be able to fabricate a way to route it under your Sienna but I recommend leaving it in the trunk area. The harness won't be harmed at all while using it when it's sticking out of the trunk. Then for a trailer hitch, you will want a Draw-Tite, and you...
view full answer... - Trailer Wiring Harness Recommendations for a 2012 Sienna XLE AWDCurt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # C56106, is a fit for your 2012 Toyota Sienna. You can also use T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118498 or Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM11143495. All of them install and function the same way. I prefer # 118498 because we hear about less issues with the Tekonsha brand. I have linked a video showing an example installation...
view full answer... - Does Draw-Tite Trailer Hitch Receiver 76112 for 2014 Toyota Sienna Have Tab for 7-WayThere is a tab that will allow you to attach a 7-way connector on the Draw-Tite trailer hitch receiver that fits your 2014 Toyota Sienna, the Draw-Tite Trailer Hitch Receiver # 76112. This will allow you to attach a 7-way for use when towing a trailer with electric brakes, and to add that to your Sienna you will need the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143495 with the Universal Installation Kit for Trailer Brake Controller # ETBC7. You can then use a brake controller...
view full answer... - Parts Needed to Install Curt Brake Controller in 2019 Toyota Sienna Without Tow PackageYour 2019 Toyota Sienna is absolutely compatible with the Curt Assure Trailer Brake Controller # C49UR. Since you do not have the tow package you will need to add the wiring to allow you to use the brake controller; please note that the correct 4-way will depend on your Sienna's model as there is a version for SE models and for non-SE models. The parts you need are the following: - 4-Way (Non-SE Models): Hopkins Plug-In Simple Vehicle Wiring Harness # HM43494 OR - 4-Way (SE Models): Hopkins...
view full answer... - 2018 Toyota Sienna SE 7 Pole Trailer WiringYou have a couple options for your 2018 Toyota Sienna SE, the one that I recommend is getting the Hopkins wiring kit # HM11143495 because it will work with the SE SUB model Sienna. The kit you were looking at # TK87FR is not supported by the SE model. Yes, the Hopkins kit is just a 4 pole connector, but your can get an adapter like # 30717 you will be ready to haul! If you wanted to go the universal route, get the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way...
view full answer... - Steering Stabilizer and Sway Bar Recommendation for 2008 Jeep Wrangler XHey Jim, so for a steering stabilizer the best option is the Roadmaster Exact Center part # RM84RR and then for an upgraded rear sway bar you'd want the Hellwig part # HE53FR and if you were also looking for a front part # HE85GR. Your handling and stability will be considerable improved with all of these parts installed!
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ralph
2/28/2022
Working great. No problems.