To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Ford F-150 and F-250 Light Duty with this custom harness. T-connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
Installation
This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this Curt T-Connector Vehicle Wiring Harness for the factory four-way tow package.Now this is a custom fit part. It is designed to fit the 1997 to 2004 Ford F150 trucks with the factory four-way and 1997 to 1999 Ford F250 light duty trucks with the factory four-way and on a custom fit part like this I always like to recommend for you to go to our website, use the fit guide, putting your year and model vehicle. It'll show if this'll work for your application.Now this will provide the four way flat trailer connector at the back of your vehicle to power your trailer's signal lights. And it is designed for use with the factory four-way tow package.
It is compatible with five pole, six pole and seven pole adapters that we do sell separately.And this does connect very quickly and easily. There's no cutting or splicing wires. Basically. You just locate these connection points, which are under the vehicle behind the rear bumper on the driver's side, plug in these T-connector here, ground your white wire, and then run your four-way out towards the back and connect to your trailer.It does come with this nice dust cover that you could install onto your four-way, and you can leave it on there if you prefer. What's nice about is when you're not plugged into a trailer, you can put that cover over the terminals, just like that, and it'll protect them from any damage or from the elements.It does also come with some cable ties to take up any slack in the wiring.
Nice set of detailed instructions that'll describe how to install it. And also this grounding screw. When you go to install this after you make your connection, you do need to ground this white wire. It has the outlet on it. If there's a ground nearby you can attach it, if not you can use the included ground screw to make your own ground, but that should do it for the review on this Curt T-Connector Vehicle Wiring Harness for the factory four-way tow package..
Average Customer Rating: 4.7 out of 5 stars (12 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.The connector clicked in very nicely. I was replacing a broken factory 4-flat connector, so i unwrapped and cut off the existing wires from the factory connector, snapped this guy in place, re-wrapped it and zip tied it up. If it weren't 35 degrees and windy i would've been done in 15 minutes!
Easy to install. I had to drop the spare tire to get the connection for the harness, yet worked instantly once lugged in. As usual you guys are awesome to shop with.
Wiring needs to be a heavier gauge, other than that it's plug and play.
This was a very pleasant purchase. Product was shipped quickly and I was kept informed of the status of the order. Will be using etrailer.com for future needs.
Just as described
Very good fast delivery and right on the money its perfect . thank you for the prompted sevice
Excellent
The hitch was exactly what I ordered and it fit great!
Haven't used it yet, but looks easy to use. Was shipped quickly.
Fit perfectly easy install
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
2/5/2018
As to checking up with my purchase ! Kudos! As to the product I purchase, I have yet to find fault in it, does as it suppose to.