Cadac 2 Cook 3 Pro Deluxe Camping Stove - 2 Burner - Grill and Griddle Cook Tops - 7,500 Btu

Video Transcript for Review of Front Runner Camping Kitchen - Cadac Dometic 2 Cook 3 Pro Deluxe Camping Stove - FR96EJ

Hi everybody, Andy here with etrailer.com. Let's take a look at this Cadac Dometic 2 Cook 3 Pro Deluxe camping stove by Front Runner. This portable camp stove is going to let you brew coffee or grill and griddle or cook in a pan with three exchangeable cook surfaces. This supports the use of RV propane one-pound canisters and free standing propane tanks. And those hoses are sold separately. And this is going to provide a heat output of 7,500 BTUs per hour per burner.

Now included with this is going to be your 1/4 inch and 1/8 of an inch adapters and then the one inch by 20 adapter regulator. This is of course gonna be for those canisters. So those adapters are included with this along with a wrench to help tighten those fittings. And then this is also features two push button piezo knobs here or buttons here that's going to allow you to make lighting this stove very simple. The twin burners are gonna let you cook meals and quickly boil water.

And then the individual control knobs are going to adjust the flames from simmer all the way to high heat. So you got quite a bit of adjustability with the heat levels on each of these burners. Now let me go ahead and just give you an overhead look so you can get a better view of the cooking surfaces, the cooking surface rather. Now this camping stove does include these two pot stands so these are going to be included. And these stands do kind of have a a rubber feet on here so it's not going to scratch up the surface and they're gonna stay put.

So again, two pot stands and these stands can support pans from seven inches all the way up to 10 inches wide. Now this is also going to work with the Cadac paella pan and they are just sold separately but I do happen to have one here. And so I'll just go looking at the front view again, let me just show you how that's going to set right in place there. If you don't have this pan and you're interested in taking a look at it, the good news is we do carry this pan here at etrailer.com. And you can just take the item number that you see there on your screen and put it in the search field of our website and that will take you to this pan if you are interested in checking that out as well.

So that is compatible with this stove. And then just to go over some of the other features that this stove is going to come with. You're going to get one aluminum flat plate. And to use this, you're just going to remove one of the pot stands there and then set that hot plate, that flat plate rather in place. And then you're also going to get one aluminum ribbed plate. So I'm gonna go ahead and remove this pot stand as well and put that into place. And of course you can mix and match depending on what you're cooking or what you're warming up. So you're gonna have maximum flexibility and adjustability there as well. Now these plates do have a green grill ceramic coating that's going to heat up fast with less fuel. And the cooking surfaces are PFOA and PTFE free. And I did wanna show you that this does also include this removable handle. So going back to our front view there when these are too hot to the touch. As you can see on the front of each plate, there's a slot there that you can insert the removable handle and that's going to allow you to safely remove these plates when they're hot and you're gonna have a really firm hold on those plates. So this removable handle is included and that's a really nice addition to this stove. Let me go ahead and remove the ribbed plate here and also show you the other cooking surface that we have here. I'm gonna remove our pots, replace rather one of our pot stands here. And we do have this probably my favorite addition here, this coffee pot ring. And this is going to just set on the pot stand there. And that's going to allow you to cook or actually brew the coffee using a small or large coffee pot. So that is also included with this stove. And then the lid and these side panels here are going to help protect your flames from wind. And let me go ahead and just remove our flat plate here. And I'm gonna go ahead and replace the pot stand here on this end. These side panels are removable. They actually are going to just pop in there. And so that's going to help, like I said, protect against wind and you're not gonna have to worry about the flames easily going out or anything like that. On the bottom, we do have rubber feet as you can see here at the corners. And that's going to help prevent slipping and protect the underside of the stove as well. Now let me go ahead and kind of walk you through how to close this up and then show you how to pack this in the bag that is included with this. So you would, you're gonna begin by removing the side panels here and I'm just gonna put those here in the front. And then the lid is just going to easily close. And then there's a latch here that's going to keep that lid shut. And then you can just pop that lid open again or pop the latch open to open that lid. So it's going to close very easily. And then to put, to pack this into the case, there is a certain way, a set way that you have to do this. So let me walk you through that procedure. Of course you wanna make sure that everything is completely cooled down. And I wanna give you an overhead view of this here. So you just have a better view of the inside. And this case is padded at the top and at the bottom. And then we do have some pockets here. The material itself is kind of like a nylon material. So you're gonna begin with your plates. And of course, as I mentioned, you wanna make sure that they're completely cooled and you probably wanna make sure that they're cleaned up as well. And you're gonna place the plates face down at the bottom of the case. And then you'll take your stove and then just place that on top of these plates that are upside down. Just kind of work that, work this into the bag, just like that. So that's going to be in place. And then you have these pockets here. And I'm gonna go ahead and go to our front view here. We have these pockets on the inside and those do serve a purpose. We're going to put our side panels that block the wind in those front pockets. And then on the side pockets, you can take the removable handle, the adapters, and I'm just going to put them right in there. I'm gonna take that wrench and throw it in there as well. Adapters are in there. And then, this will just go underneath the stove itself. Since I already have the stove in there, I'm not going to pop that back out. But you'll just put that underneath the stove. And then just zip this shut. Let me go for a wide view here so we can see this a little bit more. And then it's going to be ready to transport. We got a handle here that feels well attached, sewn in there pretty good. And like I said, it's a little bit padded, so it's going to give you a little bit of protection while also just making this very easy to transport. And then when you have this being, when you're storing this and you're not using it, it's going to keep it protected, keep it clean, and it'll be ready to go the next time you're wanting to use this. Now just some measurements while I have this all closed up. Looking at the overall width first. I measured earlier from end to end, we're sitting at about 21 11/16 inches wide. And then the overall length or depth however you'd like to identify that, we're sitting at about 12 3/16 inches long. And then the overall height from the surface that it's sitting on all the way to the top, when this is closed, we're sitting at about 3 1/2 inches tall. And this weighs a little bit under 12 pounds. So the weight is very manageable. It's not overly heavy, but it feels like it's a very well-built stove and it feels like it's going to be very long lasting. Instructions are included to walk you through the features and make sure you're using this stove the way that it was intended. And I think that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.