# 1
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
Was not too hard to install if you have a little mechanical background. The hardest part was drilling through the bumper frame.
# 2
Blue Ox Base Plate Kit - Removable Arms
Build quality is excellent. No issues what-so-ever regarding the integrity and the strength of the design. Installation was not without issues. Some self-inflicted wounds like when I lost lock on all the fasteners for the bumper and frontend. I bet there were over 50 screws and clips each of which had their own location. I wish I would have put them in separate baggies and labeled everything. Also, suggest you use masking or painters’ tape to line everything up before you take the front bumper and cowling off. That would have saved time. BlueOx recommends using a 1.25in hole saw. NOT for me. No way you can get the hole saw to bite. Much better is a tapered drill. Available for about the same price as a hole saw, far more versatile, and a LOT EASIER to control. I’ll admit to not being the sharpest spoon in the drawer and I am a bit retentive, but I spent probably 20 hours on the install. The issue I had was not with the baseplate perse, but rather with taking everything apart and then figuring out how to put it back together again with no leftover parts. There are two criticisms I would levy at BlueOx. ONE: They provide a helper to install an otherwise inaccessible nut. Well that’s fine, but the threads were fouled and need to be cleaned. That should have been prior to shipment. And TWO: They were explicit in their measurements, which I followed, and messed-up. By the time I found the issue, I would have had to take the bumper off – so I improvised a work-around.
The devices were delivered in a sturdy box and were delivered right on time. etrailer also supplies a video on how to install this item. Harbor Freight doesn't do that!
# 3
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
Thanks
it was delivered in a timely manner, I was able to do the complete installation by my self in my driveway. I love the ease of use, I can connect and disconnect in minutes. I would recommend it to anyone who is going to be towing a dingy!!
# 4
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
Was not too hard to install if you have a little mechanical background. The hardest part was drilling through the bumper frame.
# 5
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
Was not too hard to install if you have a little mechanical background. The hardest part was drilling through the bumper frame.
# 6
Blue Ox Base Plate Kit - Fixed Arms
I ordered the Blue Ox base plate, fixed arms, and Patriot braking system for a new Class C utilizing my 2001 Nissan Frontier as my tow. I installed the base plate, everything went well. We returned home from Iowa with our new Class C last week and our Nissan in tow. I could not be happier with all the products I bought at e-trailer. They are all great products and the customer service and shipping could not have been better.
Build quality is excellent. No issues what-so-ever regarding the integrity and the strength of the design. Installation was not without issues. Some self-inflicted wounds like when I lost lock on all the fasteners for the bumper and frontend. I bet there were over 50 screws and clips each of which had their own location. I wish I would have put them in separate baggies and labeled everything. Also, suggest you use masking or painters’ tape to line everything up before you take the front bumper and cowling off. That would have saved time. BlueOx recommends using a 1.25in hole saw. NOT for me. No way you can get the hole saw to bite. Much better is a tapered drill. Available for about the same price as a hole saw, far more versatile, and a LOT EASIER to control. I’ll admit to not being the sharpest spoon in the drawer and I am a bit retentive, but I spent probably 20 hours on the install. The issue I had was not with the baseplate perse, but rather with taking everything apart and then figuring out how to put it back together again with no leftover parts. There are two criticisms I would levy at BlueOx. ONE: They provide a helper to install an otherwise inaccessible nut. Well that’s fine, but the threads were fouled and need to be cleaned. That should have been prior to shipment. And TWO: They were explicit in their measurements, which I followed, and messed-up. By the time I found the issue, I would have had to take the bumper off – so I improvised a work-around.
# 7
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
Was not too hard to install if you have a little mechanical background. The hardest part was drilling through the bumper frame.
# 8
Blue Ox Base Plate Kit - Fixed Arms
Build quality is excellent. No issues what-so-ever regarding the integrity and the strength of the design. Installation was not without issues. Some self-inflicted wounds like when I lost lock on all the fasteners for the bumper and frontend. I bet there were over 50 screws and clips each of which had their own location. I wish I would have put them in separate baggies and labeled everything. Also, suggest you use masking or painters’ tape to line everything up before you take the front bumper and cowling off. That would have saved time. BlueOx recommends using a 1.25in hole saw. NOT for me. No way you can get the hole saw to bite. Much better is a tapered drill. Available for about the same price as a hole saw, far more versatile, and a LOT EASIER to control. I’ll admit to not being the sharpest spoon in the drawer and I am a bit retentive, but I spent probably 20 hours on the install. The issue I had was not with the baseplate perse, but rather with taking everything apart and then figuring out how to put it back together again with no leftover parts. There are two criticisms I would levy at BlueOx. ONE: They provide a helper to install an otherwise inaccessible nut. Well that’s fine, but the threads were fouled and need to be cleaned. That should have been prior to shipment. And TWO: They were explicit in their measurements, which I followed, and messed-up. By the time I found the issue, I would have had to take the bumper off – so I improvised a work-around.
I ordered the Blue Ox base plate, fixed arms, and Patriot braking system for a new Class C utilizing my 2001 Nissan Frontier as my tow. I installed the base plate, everything went well. We returned home from Iowa with our new Class C last week and our Nissan in tow. I could not be happier with all the products I bought at e-trailer. They are all great products and the customer service and shipping could not have been better.
# 9
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
Great Company Product arrived on time and the tracking information was above and beyond what I expected Product is exactly as described and of excellent quality Would highly recommend etrailer and Roadmaster
The install was easy and the base plate does a great job. The only issue that I had was the mount for the wiring harness had one of the mounting points welded on backwards. I did not notice this until the mounting plate was completely installed. etrailer gave me a small amount of money back for this, but that amount of money definitely was not worth the inconvenience this small error in manufacturing has caused. If it were not for this defect I would be 100% happy with this product and recommend it to anyone. Since this defect creates an inconvenience every time I hook up and unhook it is pretty frustrating and I know it will eventually lead to the plug mount breaking since there is no way to properly attach it. A note to the manufacturer and to etrailer... the small things matter. It did not seem to matter to you, but it matters a lot to the guy who paid you for it.
# 10
Demco Classic Base Plate Kit - Fixed Arms
Unit works well on my 2001 Nissan frontier, have towed the truck a few times with no problems, good investment.
The base plates fit nicely but the covers are a poor fit. It would make sense to me that the covers covered the whole base plate. Thanks, Randy
# 11
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
Was not too hard to install if you have a little mechanical background. The hardest part was drilling through the bumper frame.
# 12
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
I bought and self installed this on my 2021 GMC Sierra Duramax 1 year ago. Install took about 5 hours and wasn't difficult...I could problty install it in 2-3 hours after leaening the tricks. Weve towed the truck all over the USA since then (over 10,0000 miles) and it works great! I've used other brands and highly recommend Roadmaster tow systems over the competition.
I reported that one of the removable tow arms was missing to etrailer within hours of receiving the baseplate. This was due to the shipping box being damaged during transit and likely just fell out. After four business days with no communication from etrailer I contacted Roadmaster. A couple of emails and they shipped the part. Very disappointed having to do etrailer's legwork. For this I will give etrailer one star. The baseplate RM 524473-5 for a 2023 Ford Escape fit as expected sorta. Had to apply a 3 pound hammer as the mounting brackets were tweaked a little likely from welding and pulling a little out of square. I felt the instructions had a lot of reading between the lines, a couple of times I just about picked up the phone and called them to see if my interpretation was correct. But I just consulted with my analytical 15 year old grandson and we figured it out. (His 18 year old brother served to knock me to the floor and pull me back up again, faster than calling a crane service.) My big complaint was that they could have provided actual measurements where to drill the Tupperware where the arms go through, there is a couple of reverence points that could be used. There was a few minor things that didn't/did need to be done but likely could easily be because of running production changes. (And better packing of 45 pounds of steel by RM)
# 13
Blue Ox Base Plate Kit - Removable Arms
Build quality is excellent. No issues what-so-ever regarding the integrity and the strength of the design. Installation was not without issues. Some self-inflicted wounds like when I lost lock on all the fasteners for the bumper and frontend. I bet there were over 50 screws and clips each of which had their own location. I wish I would have put them in separate baggies and labeled everything. Also, suggest you use masking or painters’ tape to line everything up before you take the front bumper and cowling off. That would have saved time. BlueOx recommends using a 1.25in hole saw. NOT for me. No way you can get the hole saw to bite. Much better is a tapered drill. Available for about the same price as a hole saw, far more versatile, and a LOT EASIER to control. I’ll admit to not being the sharpest spoon in the drawer and I am a bit retentive, but I spent probably 20 hours on the install. The issue I had was not with the baseplate perse, but rather with taking everything apart and then figuring out how to put it back together again with no leftover parts. There are two criticisms I would levy at BlueOx. ONE: They provide a helper to install an otherwise inaccessible nut. Well that’s fine, but the threads were fouled and need to be cleaned. That should have been prior to shipment. And TWO: They were explicit in their measurements, which I followed, and messed-up. By the time I found the issue, I would have had to take the bumper off – so I improvised a work-around.
I ordered the Blue Ox base plate, fixed arms, and Patriot braking system for a new Class C utilizing my 2001 Nissan Frontier as my tow. I installed the base plate, everything went well. We returned home from Iowa with our new Class C last week and our Nissan in tow. I could not be happier with all the products I bought at e-trailer. They are all great products and the customer service and shipping could not have been better.
# 14
Roadmaster EZ Base Plate Kit - Removable Arms
great fit. a slight cut needed to be made in the bumper bracket to facilitate the round tube to fit through the bracket. but, other than that, it was an easy install took about 2 hours if you include the coffee brakes. this part is highly recommended. Fast shipping. the beast human service. thank you.
Kit was installed by hitching post on Ocala Florida. The installation has been a success. I really like the diodes for compatable wiring. Towed about 4 thousand miles in my Ram and feel confident that it will go many more.
# 15
Blue Ox Base Plate Kit - Removable Arms
Build quality is excellent. No issues what-so-ever regarding the integrity and the strength of the design. Installation was not without issues. Some self-inflicted wounds like when I lost lock on all the fasteners for the bumper and frontend. I bet there were over 50 screws and clips each of which had their own location. I wish I would have put them in separate baggies and labeled everything. Also, suggest you use masking or painters’ tape to line everything up before you take the front bumper and cowling off. That would have saved time. BlueOx recommends using a 1.25in hole saw. NOT for me. No way you can get the hole saw to bite. Much better is a tapered drill. Available for about the same price as a hole saw, far more versatile, and a LOT EASIER to control. I’ll admit to not being the sharpest spoon in the drawer and I am a bit retentive, but I spent probably 20 hours on the install. The issue I had was not with the baseplate perse, but rather with taking everything apart and then figuring out how to put it back together again with no leftover parts. There are two criticisms I would levy at BlueOx. ONE: They provide a helper to install an otherwise inaccessible nut. Well that’s fine, but the threads were fouled and need to be cleaned. That should have been prior to shipment. And TWO: They were explicit in their measurements, which I followed, and messed-up. By the time I found the issue, I would have had to take the bumper off – so I improvised a work-around.
I ordered the Blue Ox base plate, fixed arms, and Patriot braking system for a new Class C utilizing my 2001 Nissan Frontier as my tow. I installed the base plate, everything went well. We returned home from Iowa with our new Class C last week and our Nissan in tow. I could not be happier with all the products I bought at e-trailer. They are all great products and the customer service and shipping could not have been better.
# 16
Roadmaster Direct-Connect Base Plate Kit - Fixed Arms
I have Rugged Ridge Modular XHD Bumpers for Jeep Wrangler JK and needed special adapters for the Blue Ox tow system. Alex J. was able to guide me and get exactly what I needed for my setup. These are working great!!
# 17
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
This was a straightforward install. The instructions were easy to understand and follow. All the necessary parts and hardware were included. It is pretty well hidden once installed. I highly recommend this base plate and etrailer.
great fit. a slight cut needed to be made in the bumper bracket to facilitate the round tube to fit through the bracket. but, other than that, it was an easy install took about 2 hours if you include the coffee brakes. this part is highly recommended. Fast shipping. the beast human service. thank you.
# 18
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
Installed on my 2020 jeep jl sport s with factory plastic bumper and plastic rock guard. Shane’s video was very helpful but I did not like how the metal plate behind the rock guard was cut away and how the rock guard had two big cut outs so I did some modifications. I cut two slots in the metal bracket and added angle brackets for extra support. As a result i did not use the supplied brackets for the rock guard. I created a template for the rock guard which resulted in two small cut outs. A lot of extra time but i am retired so time is relative. I think it looks great.
I bought this base plate kit for my 2022 Jeep Rubicon Gladiator so I could flat tow behind my class a motor home with a Roadmaster Falcon all terrain non binding tow bar. The instructions were easy to follow and went smoothly except drilling the holes. That was my fault because I was using a dull drill bit. See attached photo
# 19
etrailer Invisible Base Plate Kit - Removable Arms
Excellent service on a timely delivery. The box was torn apart but all the parts were inside. I’m sure it didn’t get shipped that way but damaged by the carrier.
Super simple install and stealthy look once installed. This looks way better than any other baseplate on the market. A+
# 20
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
Thanks
Excellent service -- ordered online afternoon of July 13; shipped same day and arrived two days later. etrailer video was helpful in outlining steps for installation - especially fascia removal prior to actual install. Installation took about 3 1/2 hours which includes fascia/grill removal and reinstall. Did need to secure additional fender clips to reinstall fascia - many broke during removal as almost 20 years old -- available aftermarket from Dorman. Order arrived correct with all parts/no damage. Fit was excellent. Will order from etrailer again
What our customers are saying:
"The phone operator was very helpful and made my purchase easy. I will keep this website handy."