RLCP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Fixed Mounting Points - Qty 4
(16 reviews)
Price: $36.94
In Stock
RLCP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Fixed Mounting Points - Qty 4
Item # RRVA-FK2-2
Our Price: $36.94
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (16)
- Q & A (0)
- Photos
Rhino Rack Accessories and Parts - RRVA-FK2-2
- Roof Rack
- Adapters
- Crossbars
- Leg Spacers
- Rhino Rack
These precision-molded adapters provide perfect, no-wobble mounting points for 2 Rhino-Rack Vortex Aero crossbars on Rhino-Rack RLCP legs for factory fixed mounting points. Includes 4 adapters and mounting hardware.
Features:
- 4 Adapters let you mount 2 Rhino-Rack Vortex Aero crossbars onto RLCP legs for factory fixed mounting points
- Provide stable platform for mounting legs to the crossbars
- Eliminate the gap between the top of the legs and the bottom of the bars
- Durable, weather-resistant nylon construction
- Set includes 4 adapter plates, 4 M6 nuts, 4 square washers, (4) 10-mm hex-head bolts, and 4 lock washers
- Limited lifetime warranty
These adapters let you attach Rhino-Rack Vortex Aero crossbars to Rhino-Rack RLCP legs. The adapters provide a perfect crossbar-to-leg fit with no wobbling or gaps. The kit includes 4 precision-molded nylon adapters and all hardware necessary for installation.
The adapters provide the perfect mounting surface for Rhino-Rack Vortex Aero crossbars. Without the adapters, the grooves on top of the RLCP legs don't match those on the crossbars, resulting in an imperfect fit with a noticeable gap. With the adapters installed, the crossbars fit on the RLCP legs with no gap or wiggle room.
To install the adapters, slide an adapter block into the groove on top of each RLCP leg. Thread the 10-mm bolt through the square washer, leg, and adapter. Then thread the M6 nut onto the end of the bolt. Leave enough space between the M6 nut and the top of the adapter so that you can slide the M6 nut into the crossbar's bottom channel. Once the legs are positioned properly in the channel, simply tighten down each 10-mm bolt for a sturdy, wobble-free mount.
VA-FK2 RLCP Fixed Mounting Point Leg Adapters for Vortex Aero Aluminum Bars - Qty 4
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
- Wrong item was ordered
Customer Reviews
RLCP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Fixed Mounting Points - Qty 4 - RRVA-FK2-2
Average Customer Rating: 4.5 out of 5 stars (16 Customer Reviews)
These precision-molded adapters provide perfect, no-wobble mounting points for 2 Rhino-Rack Vortex Aero crossbars on Rhino-Rack RLCP legs for factory fixed mounting points. Includes 4 adapters and mounting hardware.by: StuWithAU05/03/2017
I love my Rhino Vortex roof racks. They look great, are sturdy, and there is no wind noise up to 70 mph (haven't been on the freeway yet). eTrailer was great and made the proper component selection easy.
Now, the -1 star... The instructions provided by Rhino were horrible or non-existent. The cross bar literally had no instructions and I couldn't even find them for my model online. Between being a handy guy and watching other Rhino videos on YouTube, I figure it out. Maybe most people have professional installers put them on.
by: Vincent 07/17/2015
Etrailer made the entire process of choosing a rack for my Jeep simple. I was provided with all the necessary info to track the status of the delivery which was important since I needed the product by a certain date. The Product was relatively easy to install and is strong and sturdy. Only minor issue is the wind noise while driving above 55mph.
Vincent
7/31/2016
Still functioning fine after a year.
by: Erik J04/24/2017
We'll start with the good. The racks look great once installed and are very durable like I expect from Rhino Rack.
There are a few thing I have noticed with the quality of materials and the design of the roof racks. First off, I have noticed a reduction in the quality of the hardware. Once you get the mounting points secured, which was relatively easily, they ask you to secure the legs with 1 security screw per leg. Not only does the screw not turn more that 2 turns without stopping, the included security hex wrench is small and fails to turn the screws without stripping. I have found since they don't quite fit, I had to WD-40 the screw and the hole, and the use pliers to grab the head of the screw and work it in there. Once you are able to bore the hole out that way, you can back it out quite easily, and the you can use the included wrench to install.
I thought the hardware and Allen wrench device they included with their roof racks several years ago were much higher quality and easier to work with. I also thought paying nearly $400 for these racks would justify high quality materials and tools, but I suppose Rhino Rack is cutting corners as well. The L shaped torx wrench they provide does a poor job of gripping the screw and is nearly worthless, because of the fact that the screws do not fit in the holes without other tools.
Also, a small thing that has been mentioned before on this site, the plastic locking caps are not the highest security measure, but I see you can upgrade to metal end caps for more money. I feel this should be included for this price point.
I believe this may be my last set of Rhino Racks because I just see their quality going the wrong direction.
by: Mark12/03/2017
The crossbars are strong and look good too. I've don't have any complaints.
Mark S.
12/10/2018
I use them year round, and still have no complaints.
by: Colin01/11/2019
Fit my RLCP legs to complete my roof rack system with the vortex bars on my 2016 Jeep Grand Cherokee
by: Anel12/11/2017
The service was amazing! They were able to quickly fit my car with great crossbars and cargo box. Great price and fast shipping.
by: MerryO08/06/2015
Easy to use and straight forward adapters for the Vortex Aero crossbars.
by: Phillip12/01/2017
Nice quiet roof rack. Great value and easy assembly and installation.
by: Gordon W06/29/2016
No problems with the installation. Everything worked as described.
Again thank you for the great Customer Service and concern that I was happy with my purchase.
by: Kenny12/02/2018
The product has been great. It is a little noisy on the freeway and whistles. The bars are very durable and were easy to install.
by: Tunce04/11/2019
A BETTER MORE CUSTOM FIT THAN THE DEALER'S VERSION.........BY FAR.......
by: Mike10/10/2016
Good fit kit to take up the slack between the legs and vortex rails but I feel they should come with the legs or rails; not be an extra add on item.
by: Brad B07/18/2016
Easy install and still function perfectly a year later!
by: Kevin12/26/2017
Great customer service
by: Clayton11/22/2017
Easy to use
by: Jonathan 08/03/2021
16
16
See what our Experts say about this Rhino Rack Accessories and Parts
- Recommended Roof Rack For 2016 Ford ExplorerOne of the nicer roof racks we offer and the one I recommend is the Rhino-Rack Vertex. This roof rack has aerodynamic aluminum crossbars that have rubberized strips in the channel to help reduce wind noise. The roof rack also has feet that are designed to work in the fixed mounting points on the roof of your 2016 Explorer. To order this roof rack you will need part # RRVA137B-2, part # RRVA-FK2-2, and part # RRRLCP45. I have attached a link to an installation video for this roof rack...
view full answer... - Roof Rack and Cargo Box with Largest Capacity for a 2014 Honda OdysseyFor your 2014 Honda Odyssey, if it has the factory side rails I recommend the Thule AeroBlade Edge # TH7503-TH7504. This is an aerodynamic roof rack that is quiet and has lower drag than square or round bar systems. It is also made of aluminum so it is light weight and corrosion resistant. It is also available in black, # TH7503B-TH7504B. Or for a more budget-friendly option I recommend the Inno square bar roof rack # INB137 for the bars and # INFR for the feet. If the van does not have...
view full answer... - Recommended Roof Rack And Kayak Carrier For 2011 Honda Odyssey With Naked RoofI have attached a link to all of the roof racks we offer that are designed to fit the roof of your 2011 Odyssey. Each of these roof racks require drilling into the roof of the vehicle so tracks can be mounted. I recommend the Rhino-Rack Vortex Roof Rack for your Odyssey. This roof rack has aerodynamic silver crossbars that help reduce wind drag and noise. The roof rack has a 165-lb weight capacity which can handle your 104-lb kayak. To order this roof rack you need part # RRVA137B-2,...
view full answer... - Roof Rack and Ski/Snowboard Carrier Recommendation for a 2014 Jeep Grand CherokeeYes, the Thule Ski and Snowboard Carrier # TH7326 that you referenced will fit Rhino Rack crossbars. For your 2014 Jeep Grand Cherokee with flush rails the Rhino Rack roof rack you would need would consist of part numbers # RRVA126B-2, # RRRCL4, and # RRRCP27-BK. The flus rails will need to have chrome trim on top of them.
view full answer... - Roof Rack Recommendation to Carry the Upright Roof Bike Carrier # S64720 on a 2016 Ford ExplorerYes, the Rhino-Rack roof rack which consists of the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2, the RLCP Leg Adapters # RRVA-FK2-2, and the RLCP Leg Kit # RRRLCP45 will fit your 2016 Ford Explorer. This system will install on the flush rails that run front to back of your Explorer and will allow you to use the Upright Roof Bike Carrier # S64720. I have attached some review videos for you to check out.
view full answer... - Thule AeroBlade Podium Roof Rack with Longer Bars for 2017 Ford ExplorerIt is possible in some cases to substitute longer-than-recommended roof rack crossbars in a roof rack setup. But do note that bars that extend out past the roofline can pose a safety issue - head bumps happen. That said, the various roof racks made for your 2017 Ford Explorer that has flush mounted rails that run front to back DO come in different crossbar lengths ranging from 48-inches with the Yakima round bar system (parts # Y00408, # Y00148, # Y03536 and # Y00245) up to 54-inches as...
view full answer... - Roof Rack Compatible With Carrying Two 17 Foot Canoes On A 2017 Toyota Highlander XLEFor your 2017 Toyota Highlander, I recommend the Roof Rack by Rhino Rack. This vehicle's suggested roof rack includes the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # RRVA137B-2, the RCH Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points # RRRCH4, and the Custom RCP Fit Kit # RRRCP31-BK. I also recommend the metal lock cores # RRVA-LEC4. This rack has a rated capacity of 175 lbs and is not restricted by canoe length with the 28 inch...
view full answer... - Roof Rack Recommendation for 2017 Ford Explorer with Raised RailsI have a similar solution for your 2017 Ford Explorer, but the Rola rack you mentioned will not fit your 2017 Ford Explorer. Instead you'd want the Rhino Rack kit part numbers # RRVA137B-2, # RRVA-FK2-2, and # RRRLCP45. This is an aero bar kit that is designed specifically to fit the factory raised rails of your 2017 Ford Explorer and would be a great option.
view full answer... - Roof Rack and Ski Carrier Fit for a 2016 Jeep Grand CherokeeYour 2016 Jeep Grand Cherokee Limited will need a roof rack installed on its flush rails before being able to carry a ski rack. For that the Rhino Rack part # RRRVP27 is a confirmed fit that would work well. Check out the install video I attached for more info on this as well. For a ski rack we have the part # RR574 for carrying up to 4 skis.
view full answer... - Roof Rack Recommendation for a 2014 Jeep Grand Cherokee that Attaches to Fixed Points on RoofThere is a Rhino Rack roof rack that will install to the factory fixed points you have on the flush rails of your 2014 Jeep Grand Cherokee Overland, but nothing from Thule. You would want the Rhino Rack Roof Rack that consists of the following: # RRVA126B-2, # RRRCL4, and # RRRCP27-BK
view full answer... - Recommendation for Transporting 2 Kayaks on 2016 Ford ExplorerI took a look at the online owner's manual for your 2016 Ford Explorer. It does state that for vehicles with the moonroof, there is a 45 pound weight capacity. For vehicles without the moonroof, the load capacity is 100 pounds. With OEM or aftermarket crossbars installed, you will need to follow this 45 pound or 100 pound limit, depending on what type of roof your model Explorer has. If you do not yet have a complete roof rack system, I recommend the Rhino Rack Vortex Aero Roof Rack....
view full answer... - Roof Rack Recommendation for a 2007 Chevy Trailblazer for Carrying LaddersI would recommend going with the Rhino Rack HD crossbar roof rack as it will have plenty of strength for your ladders. You would need the part numbers # RB1250B-2, # RLTP-2, and # RRVA-FK2-2 which have been confirmed as a fit for your 2007 Chevy Trailblazer raised side rails.. For load stops for the ladders you would then want the part # RRRLH. For 10 foot cinch straps you could also use the part # RTD3. Be sure not to exceed the roof weight capacity of your vehicle.
view full answer... - Roof Rack Recommendation for 2014 Jeep Grand Cherokee Limited with Flush RailsThe Rhino Rack roof rack part numbers # RRVA126B-2, # RRRCL4, and # RRRCP27-BK that you referenced are a fit for the flush rails of your 2014 Jeep Grand Cherokee with flush rails as long as you see a metal strip on top of the rails like what you see in the picture I attached. If you don't see the metal strip you instead would want the Thule Aeroblade kit part # TH711520, # TH480R, and # THKIT1656.
view full answer...
- Roof Rack and Kayak Carrier Recommendation for 2011 Honda CR-VYou would first need to start with a roof rack on your 2011 Honda CR-V so that you can carry the kayak carriers. For that the Rhino Rack part numbers # RRVA126B-2, # RLCP15, and # RRVA-FK2-2 is designed to fit the factory fixed points of your vehicle and would be a great base for the kayak carriers. Then for carriers we have the Thule Hullaport part # TH834 which would be a great option.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video by:
Zack K
Video by:
Andrew K
Video by:
Joshua S
Video by:
Jonathan Y
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Adele M
Updated by:
Wilson B
Written by:
Brian B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Stuwithau
5/4/2018
Love the Rhino rack! Sometimes I think I could stand the truck Grand Cherokee upside down on it! It was a little tricky to install, but once I found YouTube vids I was good to go.