Thule Pulse Large Roof Cargo Carrier Review - 2013 Audi Q5 Video

The serial number for your Thule Summit Cargo Box per Thule will be engraved underneath the lid near the front of the lid. We do not have any reverse mounting hardware that will enable the lid to open from any side besides the normal left side. I…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

Whether the box is going to fit or not comes down to your crossbar spread. Crossbar spread is the measurement between the center of one crossbar to the other. If your crossbar spread is between 24 inches and 36 inches I HIGHLY recommend getting the…

Removing the old lid lift to install the new one part #TH14936 really is just a matter of pulling and prying old one off to then press on the new one.

The Yakima CBX Rooftop Cargo Box - 16 Cubic Ft #Y66FR is going to add about 14-1/2" of height to your crossbars. There is a little indention where the clamps are for the box but when I reached out to my contact at Yakima he said it looks…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…