Optronics GloLight Uni-Lite LED Clearance and Side Marker Light Installation Video

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

Both the CTEK US 0.8 Universal Battery Charger with Pulse Maintenance part #CTEK56865 and the Bright Way Solar Battery Charger and Maintainer part #BRW54FR would work well for this application. I prefer the solar option as it wouldn't require…

You will want to use a marine battery in addition to the Hopkins Engager #20400 because you want a dedicated battery for your breakaway brake function. If your marine battery was depleted and the pin pulled for the breakaway system then this means…

Just like the tires for your trailer, the combined load capacity of your wheels should at least match the loaded weight of your trailer. Ideally though they will have a larger combined capacity than your trailer weight to provide a nice safety…

There is a simple solution to get the isolated brake signal from your combined turn signal and brake wiring. You will simply use the Pacer Performance 3rd Brake Light Logic Module #PP20-702. The module filters out the unwanted turn signal. This will…

The best product we have for wiring third brake lights in a camper shell is the 3rd Brake Light Logic Module part #PP20-702. If you were to combine this with an in-bed wiring harness such as the Curt 5th Wheel/Gooseneck Custom Wiring Harness part…

The Mini LED Identification Light Kit for Trailers Over 80" Wide #TN26MR actually get installed to your running light circuit. I know they are red, but they are designed to be used as a way to identify the width of the trailer. I recommend…

That's a very good question, so I reached out directly to the manufacturer, Optronics, about where the red wire goes on the Identification Light Kit #MCL22RK3B. They responded by saying you will connect the red wire to the stop/turn signal wire…

Yes you are correct in your assumption. On the Optronics Thinline LED #STL64RB, the Red wire is for turn signal, so this will go either the green or yellow wire on your trailer. The black wire is tail lights so this would go to the brown wire on your…

The Optronics Flush Mount Rubber Grommet #A11GB and entire light assemblies like #MCL111AB will install just fine in a mounting surface with a 1/4-inch thickness. This grommet is made specifically for 3/4-inch Uni-Lite marker/clearance and utility…

The Identification Light Kit item #MCL22RK3B does not hook up to the blue brake wire on the 7 pin. The kit has a white wire for grounding, a black wire for the tail lights, and a red wire that connects to brake lights.

The grommet measures about 1/8" thick and the inner diameter is 1/4". The inner diameter of the front of the grommet where the light goes is 1". I have attached a diagram for your reference.