Gen-Y Phantom Stacked Receivers Adjustable 2-Ball Mount Review - 2022 GMC Sierra 1500 Video

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

Sounds like the circuit board of your MaxxFan has gone bad and is in need of being replaced with a new one like the part #MA10A21275K which is the correct replacement for your roof vent.

If all you want is to prevent the 12 volt power supply of your trailer battery wiring from backfeeding onto your vehicle wiring or vice versa what you need is a one-way diode like part #RM-690. This only allows current to flow in one direction so…

The MaxxAir MaxxFan Plus Roof Vent part #MA00-04751KSX is designed to replace an existing roof vent fan. Therefore, it does not come with everything needed for installation. The extra items you will need are as follows: Key Wall Control part…

I went out to our warehouse to take a couple measurements on the B&W Tow & Stow 2-Ball Mount #BWTS10033B that will let you determine if there will be any interference between the unit when it's in the stored position and the…

In order to connect the Wall Control Panel #MA59FR to your MaxxFan Deluxe Roof Vent #MA00-07000K, you need the MaxxAir RV Wall Control Communication Cable #MA69FR. This part is not included with the roof vent or the wall control panel, so you will…

The B&W Tow & Stow 2-Ball Mount #BWTS10033B has a two different sized hitch balls, with the 2" ball having a 7.500 lb capacity and the 2-5/16" ball having a 10,000 lb capacity so it should be hefty enough for your mobile restroom…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I wasn't able to reference this part number but we do carry a few wall mount switches for MaxxAir Vent Fans, the part #MA59FR and part #MA00A03550K. If yours look like either of these two options then they will work great for you but they are the…

Yes, you can set the B&W Tow and Stow Ball Mount part #BWTS10033B to 0 rise if you align the adjustable portion of the ball mount with the shank in the drop position. There is not an offset in drop position it starts at 0 and the increments…

Yes, the B&W Tow & Stow 2-Ball Mount - MultiPro - 2" Hitch - 4.5" Drop/5.5" Rise #BW29FR. will allow indeed allow you to open the GMC MultiPro tailgate. This is designed specifically so you can leave the ball mount in and use…

I called my contact at MaxxAir and asked about the mounting of the MaxxAir MaxxFan Deluxe #MA00-07000K. They told me that it can be mounted on the side but would really increase the chance for water leaks as you mentioned. They said they have never…