Will B&W Tow & Stow 2-Ball Mount Clear GMC MultiPro Tailgate With Mount Removed

Question

Question:

will the hitch still clear the GMC multi-pro tailgates?

asked by: Bob R

0

Expert Reply:

Yes, the B&W Tow & Stow 2-Ball Mount - MultiPro - 2" Hitch - 4.5" Drop/5.5" Rise # BW29FR. will allow indeed allow you to open the GMC MultiPro tailgate.

This is designed specifically so you can leave the ball mount in and use the MultiPro tailgate; you can lock it with Hitch Lock # e98882.

expert reply by: Kyle S

0

Answer 1

You need the B&W Tow & Stow 2-Ball Mount #BW29FR since you have the Multi Pro tailgate on your 2023 GMC Sierra 1500. This will clear the tailgate when the hitch ball is flipped into the stow position unlike the Mount #BWTS10038B you found. We…

view full answer...

Answer 2

Yes, we have the B&W Tow & Stow 2-Ball Mount #BW29FR that is capable of a 4-1/2" drop. This fits your 2" receiver like the B&W Tow & Stow 2-Ball Mount #BW44FR you found and will allow you to use it with your MultiPro…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 10

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 11

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

Answer 12

The correct replacement leaf spring bushings for any given trailer will be dependent on the width and type of the leaf springs. The most common for a Dexter 10,000 lb Trailer Axle are 3" wide slipper springs. If you have 3" wide slipper…

view full answer...

Will B&W Tow & Stow 2-Ball Mount Clear GMC MultiPro Tailgate With Mount Removed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching