Draw-Tite Max-Frame Trailer Hitch Installation - 2014 Mazda CX-5 Video

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

The Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates part #RM-677 uses 5/8" pins to secure to the lugs on the base plate arms so the Curt Clevis Pin with Handle and Clip part #C45805 will fit.

The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…

Since Atwood went out of business none of their actuator (or other product) replacement parts are available unfortunately, so your only real option to having a working actuator is to replace the entire unit. I am attaching a link to our selection of…

I checked with Roadmaster and the RM-766 cannot be used with the diesel engines likes what you have in your Silverado. The lighting kit part #RM-152-98146-7 will fit and work great in your 2020 Chevy Silverado 1500.

I pulled up the owners manual of your 2022 Chevy Silverado 2500HD and on page 380 where the instructions for flat towing the vehicle is listed it does state that the negative post of the battery does need to be disconnected. The truck does need to be…

There are base plates and a light kit that fit your 2023 GMC Sierra 1500; the base plates are from Blue Ox and fit all models of '23 Sierra 1500, including your Denali. The correct part is the following: - Blue Ox Base Plate Kit #BLU35XR Then for…

The Curt trailer wiring harness you referenced, part #C56011, is a correct fit for your Mazda CX5. This plug-and-play harness connects at the tail light assemblies by plugging in between the vehicle wiring and the tail light assemblies. I have linked…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76138 is a great option for a 2016 Mazda CX-5. In regards to install, you don't need to worry about angles or measurements, it uses preexisting holes in the frame so the hard work is done for…

Good news, I can help make sure you have everything you need to tow your trailer. The Curt Class III hitch #C13315, you were looking at does install easily, but I would recommend the Draw-Tite Class III hitch #76138 instead. Depending on if your…

I will be glad to help you set up your 2018 Mazda CX-5 for transporting you and your daughters' bikes. For ease and convenience of use I recommend going with a platform style receiver mounted bike rack. The Hollywood Racks Destination Bike Rack…

There are two sizes and two classes of hitch offered for your 2015 Mazda CX-5. These are the 1-1/4-inch Class II type and the higher-capacity 2-inch Class III type, such as the Draw-Tite #76138. The linked page will show you all available hitches and…