Installation Process for Curt 4-Pole Trailer Wiring Harness # C56011 in 2013 Mazda CX5
Question:
Where can I find Mazda cx 5 installation instructions? I have the C56011 kit but it does not have cx5. I what little I have read on the web it sounds like the inside panels come off to get to the connectors. Maybe I dont have to take the tail lights off
asked by: Paul
Helpful Expert Reply:
The Curt trailer wiring harness you referenced, part # C56011, is a correct fit for your Mazda CX5. This plug-and-play harness connects at the tail light assemblies by plugging in between the vehicle wiring and the tail light assemblies.
I have linked an install video showing a 2014 CX-5 that you can review.
You will need to get access to the tail light wiring in order to connect the harness. This will require removal of interior access panels at the rear of the vehicle. The vehicle wiring will be plugged in to the back of the tail light assemblies; the plug-and-play connectors on the curt harness will plug in between these connectors and the lights themselves.
I was able to find an online version of the owners manual for your vehicle. On pages 365-366 there are diagrams regarding the process of replacing tail light bulbs. The illustrations show the interior access panels that need to be removed temporarily to access the wiring. Once there, simply unplug the connector at the lights, connect the harness wiring, reconnect the vehicle wiring and reinstall the light housings. You will need to make connections on both sides of the vehicle.
Once you have made the plug-in connections you will need to attach the white ground wire ring terminal to a clean bare metal surface behind the driver-side tail light; you can use an existing ground point if there is one or you can carefully drill a hole to install the ground wire. Be sure to avoid any components that may be located behind the point where you drill. A solid ground connection is critical to proper operation of the harness.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Video: Trailer Wiring Harness Installation - 2014 Mazda CX-5
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Video: Review of Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56011
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2014 Mazda CX-5
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Troubleshooting No Turn Signals of Curt Trailer Wiring on 2015 Mazda CX-5 With Headlights On
- Video: etrailer Trailer Hitch Installation - 2014 Mazda CX-5
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Active Tail Light Converter with Install Kit
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Vehicle Tow Bar Wiring
- Video: Best 2012 Mazda 3 Trailer Hitch
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit