Curt Class III Trailer Hitch Installation - 2021 Nissan Rogue Video

The Class III hitches we have for your 2022 Nissan Rogue include the Draw-Tite #DT85MR and the Curt #C24HR. I recommend going with the Draw-Tite over the Curt because it sits about 1/2" higher off the ground and the center of the hitch pin hole…

The Draw-Tite #DT85MR and etrailer.com #e93ZR Class III hitches will be evenly matched in weight capacities for your 2021 Nissan Rogue, so we can disregard the capacities for this comparison. Especially since your Rogue can tow, when properly…

When installing the Curt Hitch part #C24HR on your 2021 Nissan Rogue you do no need to cut the bumper in any way or do any drilling.

That hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch #C24HR which is much more recessed like you can see in the picture I attached. I could be wrong…

Drilling is not required, and you will not need to trim or cut any part of the bumper fascia on your 2023 Nissan Rogue to install either the etrailer or Curt trailer hitches that fit. The hitches that fit are the following part numbers: - etrailer…

When installing a trailer hitch onto your 2022 Nissan Rogue I recommend The Curt Trailer Hitch Receiver #C24HR over The etrailer hitch #e93ZR and The Draw-Tite Hitch #DT85MR because The Curt Hitch has a concealed cross tube so after installing the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I reached out to my contact at Curt Manufacturing about the Curt #C24HR hitch for the 2021 Nissan Rogue and what possible issues there may be with the operation of the liftgate sensor or the rear distance sensors. They told me that those Rogue…

When comparing the Curt #C24HR, etrailer #e93ZR, and Draw-Tite #DT85MR there are very few differences. All three hitches have a 2" receiver and the same maximum gross towing weight of 3,500 lbs and tongue weight of 525 lbs. The Curt and etrailer…

We do have a trailer hitch for your 2023 Nissan Rogue. I recommend the etrailer Trailer Hitch Receiver #e93ZR. This is a custom-fit, Class III hitch with a 2" receiver. It features a bolt-on installation and a matte black powder coat finish. It…

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

In most cases Loctite is not required when installing a trailer hitch, but it would not be a bad idea. I suggest using the Loctite Blue Stick Threadlocker, #LT37643, which will provide a secure grip and protect against water and grime.