Customers compare KPG5-Q30IP to these similar products
Products Featured in this Video
Today we're going to take a look at the gooseneck to 5th wheel trailer coupler adapter square inner-tube. It has a 30,000 pound weight capacity. A gooseneck to 5th wheel adapter will let you tow your gooseneck trailer with a 5th wheel hitch. This part here is the square inner-tube that will fit most standard square gooseneck outer tubes. You can see at the very bottom it has the king pin. That's… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…
view full answer...I looked up your Dexter 8-222 Hub and was able to find the inner and outer bearing numbers as well as the grease seal used. It looks like this particular hub was designed for mobile homes and these, for the most part, have more unique bearings and…
view full answer...We had a customer who was able to replace his Dexter 8-155 hubs with the #8-201-5UC3-EZ that you referenced so they should work well for you. You can verify that this hub will work for you by pulling your current hub and making sure they have inner…
view full answer...To replace your AL-KO 568303 seal you will want the Oil Seal #91030. This seal has the same inner diameter of 2.750 inches and outer diameter of 3.779 inches. It is a confirmed fit for your #99 spindle that uses the AL-KO 568303 seal.
view full answer...If the fifth wheel hitch is mounted using industry-standard 5th wheel rails (see photo), you can simply remove the existing fifth wheel, and mount an adapter like #16055. If your gooseneck trailer has a removable coupler, we offer some king pins that…
view full answer...The hitch pin that I recommend for the Gooseneck to Fifth Wheel Adapter, #KPG5-Q25-IP, is the Redline Hitch Pin, #346H. This hitch pin has a diameter of 3/4 inch and a length of 6 inches and it will work with the coupler adapter that you referenced.…
view full answer...The 5th wheel hitch that fits your 2024 Chevy Silverado 3500 8 foot long bed with the OEM puck system and has the highest towing capacity - 31,000 lbs - is a hitch from Demco: - Demco UMS Double Pivot 5th Wheel Hitch #DM47GV The #DM47GV will mount…
view full answer...I looked up the Big Tex 22GN Gooseneck trailer and see that it has a square tube coupler. We do have an adapter, inner tube only, for square tubes, #BD0289650300. The tube is 4 inches wide on the outside. It uses holes for pins or bolts though so if…
view full answer...Pin box bolt torque is based on the size of the bolts. 1/2 inch Bolts GR5 90 ft-lbs 5/8 inch Bolts GR5 150 ft-lbs 3/4 inch Bolts GR5 275 ft-lbs
view full answer...For the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter, the kingpin coupler set screws, please note the linked instructions below.
view full answer...We offer 2 square tube gooseneck-to-fifth-wheel coupler adapters, the Redline Coupler Adapter, #KPG5-Q25-IP, and the Bulldog Coupler Adapter, #BD0289650300. These are quality couplers that would do an excellent job. If I were choosing one of these…
view full answer...There are just a couple of differences between the A30 and PowerRide 5th wheel hitches that fit your 2023 GMC Sierra 3500 with the OEM puck system - the use of a lube plate/grease and the finish. I'll detail that, but real quick, here are the…
view full answer...