Replacement Bearings for Dexter 8-222 Hub
Question:
Hi I have a trailer with Dexter 8-222 axles with welded on backing plates, the trailer has been sitting for awhile so I need to replace everything that is replaceable on these
asked by: Ben
Expert Reply:
I looked up your Dexter 8-222 Hub and was able to find the inner and outer bearing numbers as well as the grease seal used. It looks like this particular hub was designed for mobile homes and these, for the most part, have more unique bearings and bolt patterns because they are technically manufactured for one time use only and not meant to be altered or replaced.
Because of this, there is unfortunately not a 6 on 5-1/2 inch hub available that will be compatible with your trailer's axle spindle.
If you simply need replacement bearings and seals, you will use # L68149 for the inner and # LM67048 for the outer. For the Grease Seal you will need # 10-40.
If you need your assemblies functioning as well then it would be best to get a new axle since what you have is welded on and rusted to the point of near failure.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.938 Inch I.D.
- 2.510 Inch O.D.
- Redline
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.938 Inch I.D.
- 2.510 Inch O.D.
- Redline
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: 3035~p
- Shop: B&W Pintle Hook Mounting Plate for 2" Hitches - 11" Shank - 8 Hole - 16,000 lbs
- Shop: Brake Controller
- Search Results: 3035
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: tjp~5002s~b
- Shop: Trailer Hub Oil Seal, 3.376" OD, 2.375" ID
- Shop: Fifth Wheel Hitch
- Shop: Vesper Steel Dual Wheel - 17-1/2" x 6-3/4" - 8 on 275 mm - 8.7" Pilot - White
- Search Results: psrv20000103
- Search Results: t0778500
- Search Results: pmhd14003
- Search Results: kpg5~r25~ip
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
- Shop: Gooseneck Hitch
- Shop: Suspension Enhancement
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2019 GMC Terrain
- Q&A: Trailer Hub Recommendation to Replace Dexter 8-155
- Shop: Vehicle Sway Bars
- Q&A: Replacement Oil Seal for AL-KO 568303
- Q&A: Does Replacement Brass Connector # T4750300 Fit Dexter DX6.6 Actuator
- Q&A: O-Ring and Wrench For Dexter 21-88 Oil Cap
- Article: Gooseneck to 5th Wheel Adapters
- Article: Most Popular Wheel Bearings
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Q&A: Will DeeMaxx Disc Brake Assembly # DE89YR Fit a UFP Axle?
on Trailer Bearings Races Seals Caps
