Performance Tool Trailer Brakes W80630 Review Video

I have included a link to a video on adjusting self-adjusting brakes. Basically there is a device on the adjustment wheel on these brakes that prevents the shoes from adjusting back inward. You have to sort of move that out of the way to be able to…

Hey Ken, thanks for reaching out! The MORryde ALLTREK 4000 Shock Absorbing Equalizers, 33" Wheelbase #MR89DR or 35" Wheelbase #MR29DR, are a good upgrade to a standard leaf spring suspension and will help to provide a better ride…

Yes, you can replace your current Lippert Equa-Flex equalizers with the MORryde AllTrek 4000 Equalizers #MR29DR on your 2018 Highland Open Range. The yellow octagons on the front and rear are a for correcting the alignment of the axles and are not…

The 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e44SR you're referring to is made in the USA.

According to MORryde the AllTrek 4000 #MR29DR does not have a minimum weight requirement. However, smaller axles typically aren't compatible since there are other requirements like wheel size. The equalizers require a minimum rim size of 15"…

Nope it's correct. As a pair they are rated at 500 lbs at 50% on the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket item #TSS-107-40. This kit is designed for 3,000 lbs - 5,000 lbs overslung axles with springs sitting above the…

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as easily.…

For your 2022 Forest River Salem Hemisphere I would recommend going with the MORryde AllTrek 4000 cushioned equalizers like the part #MR29DR for if you have a 35 inch wheelbase or the part #MR89DR for if you have a 33 inch wheelbase. The reason I…

The MORryde Alltrek 4000 kits offer the best cushioning so if you are wanting to improve the ride quality of your 2011 Stellar Eclipse that would be the route I would go with. If the wheelbase is 35 inches between the axles you would want the part…

Welcome back! You do not need to cut anything away! So long as your 5" of clearance was measured with your trailer loaded and resting on the suspension you will be good. The SumoSprings Trailer Helper Springs item #SS26MV include spacers that…

A 6,000 lb axle is usually going to be 3" in diameter. Therefore, for the u-bolts you can use part #APUBR-8 for 7" long or part #APUBR-9 for 7-1/4" long. You can measure your existing u-bolts or from the bottom of the axle to the top…

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…