Hopkins Tow Bar Wiring - Plugs into Vehicle Wiring - HM56204 Review Video

Based on the issues you are describing there is something wrong internally with your monitor. Unfortunately there isn't much you can do to fix the internal components of the monitor. I recommend reaching out to Furrion and going through their…

If your Liberty was equipped with the tow package, it will have the 7-way trailer connector on the rear of the vehicle. Part #118381 would plug inline with the wiring harness leading to the 7-way. Since you do not have the factory hitch, you probably…

In order to use a Roadmaster Tow Bar On a 2010 Jeep Liberty like the Falcon 2 Tow Bar part #RM-520 you'll need the Roadmaster EZ Base Plate Kit part #521433-1. In regards to the wiring, I recommend the Hopkins Custom Tail Light Wiring Kit for…

The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56204 is a confirmed fit for your 2011 Jeep Liberty. It has integrated diodes to prevent feedback for safe operation and plugs right in to your victory wiring and the tail lights of your…

The correct Roadmaster Brakemaster Custom Seat Adapter you need is the part #RM-88149 for your 2010 Jeep Liberty.

In order to flat-tow a 2021 Ford Ranger you'll need base plates, safety cables, tow bar, wiring harness, and supplemental braking system. I have attached my recommendations for these parts below. Roadmaster Direct-Connect Base Plate Kit part…

For the 2010 Jeep Liberty, we offer two different Roadmaster Base Plate Kits. Part #521433-1 will fit Limited or Sport Models not equipped with rock guards, skid plates, or brush guards. Part #521434-1 fits Limited or Sport Models with rock guards or…

Yes, the Chevrolet HHR SS is flat-towable with all four wheels down. In order to do so you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may…

To attach the Roadmaster StowMaster 5000 tow bar to your 2009 Mercury Mariner you will need the Roadmaster XL Base Plate Kit, part #4406-1. These base plates will install on your Mariner and once the drawbars are removed, the remaining brackets are…

Yes it is and we can help you put together a complete package to flat-tow your 2009 Jeep Liberty. Please note the link to help article that I have attached with information listed below. You will need: - Base plate kit - Tow bar - Flat-tow wiring…

To flat tow a vehicle, you need a tow bar, base plates that mount to the vehicle and provide an attachment point for the tow bar, safety cables, a lighting solution and a supplemental braking system. The base plates I recommend for your 2003 Jeep…