Review of Fastway Ball Mounts - Adjustable Ball Mount - FA49-00-5925 Video

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

The locking pins that are recommended for the Flash Solid Steel HD Adjustable 2-Ball Mount #FA49-00-5925 are the Hitch Lock and Adjustment Pin Lock Set #FA86-00-4225. This would give you one 3/4" pin lock to replace one of the pins that…

There are not many differences between a welded and forged weight distribution shank in regards to practicality. They both pass the same DOT standards and meet the maximum 15,000 lb weight capacity requirement. The forged shanks started to become…

Great question! I went ahead and brought this to the attention of my tech at NOCO. He confirmed that as part of the safety measures of the NOCO Boost Plus #329-GB40, no current will be flowing to the clamps unless it is connected to that battery…

The Bulldog Recovery Strap part #BDW20014 is made of polyester which is slightly stretchy. Polyester and Nylon like the Erickson Recovery Strap part #EM59600 are the two main materials used for tow strap construction and both are elastic. That…

The only internal pieces that are replaceable on a Diversi-Tech ball mount are the lock cores like what you mentioned with part #DTLBM02RK. Since this is the case you will need to replace the entire ball mount. I know this isn't the news you…

The Buyers Products Adjustable Tri-Ball Hitch part #3371802225 and the Curt Multi-Ball Adjustable Ball Mount part #D900 are both very similar. The main difference as you mentioned is that the Buyers Products Ball Mount has a longer shank which then…

The Buyers Products Replacement Tri-Balls #3373020620 for Adjustable Tri-Ball Hitch #3371802225 is 1" from the hitch pin center hole to the end of the hitch tube(see image). This is the same measurement for all the mounting holes as they are in…

I'll start off by saying that in almost all cases, using a hitch extender will reduce your tongue weight by 50%, so your 350-lbs TW/3500-lbs towing capacity hitch is likely limited to 175-lbs TW and 1750-lbs towing. However, the Buyers Products…

Yes if you wanted to cut off the bottom of the shank of your Reese weight distribution system part #RE94FR that isn't getting used it would have no affect on the higher holes of the shank that are currently being used.

I do not recommend modifying a shank for a weight distribution hitch or cutting off any part of the shank; there is no way to guarantee any modified shank can work. Additionally, even though we do not carry EA-Z Lift products, I would be strongly…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…