Customers compare DM6033 to these similar products
Products Featured in this Video
Today we're going to take a look at the replacement side plates for the Demco Hijacker Autoslide 5th-wheel trailer hitch to fit your Ford Super Duty's Factory Underbed Rail System. Now these parts here will replace the side plates that came standard with your Demco Hijacker Autoslide 5th-wheel trailer hitch. They will fit the 18,000 pound hitch, which is part number DM8550024, and it will also fit… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
You would either need the Demco Autoslide 5th Wheel Hitch #DM29GV which already has the Side Plates #DM49GV. Or if you already have the Demco Autoslide 5th Wheel Trailer Hitch #DM8550035 you found you would need to add the Side Plates #DM49GV. These…
view full answer...If you have a Demco Hijacker Auto Slide then yes, the Replacement Side Plates item #DM6033 are exactly what you need. Once installed these side plates will allow you to drop your Demco hitch right down into the factory pucks of your 2023 Ford F-350.
view full answer...I recommend using a Lube Plate #16721 over covering the Demco Recon 5th Wheel Trailer Hitch #DM8550043 in Grease #L74FR. The lube plate is much cleaner and you will not have to constantly clean off the dirt and apply new grease over time.
view full answer...You don't need a rail adapter. To attach the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider item #DM8550035 to your 2023 Ford F-350's puck system you will need the Underbed Mount Adapter Plates item #DM6033. I have attached a picture below…
view full answer...In order to convert a Demco Hijacker Autoslide 5th Wheel Hitch for use on a 2020 Ford F-250 with Puck System you simply need new side plates, the Replacement Side Plates for Demco Hijacker Autoslide 5th Wheel Trailer Hitch part #DM6033. These will…
view full answer...Yes, the Demco Side Plate kit part #DM6033 that you referenced is what you'll need. It is designed to fit your Demco hitch and adapt it to Ford factory fifth wheel rail kit.
view full answer...The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…
view full answer...It sounds like you're looking for the Replacement Side Plates for Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM6033 for the Ford Super Duty pickups. This is the 6033 kit from Demco that includes the 14411-76 side plate part you asked…
view full answer...The Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider part #DM8550024 is a better option for an auto slide compared to the Pullrite SuperGlide because the Hijacker has 3 different height settings 15-1/2", 16-3/4", and 18-1/4" compared…
view full answer...The actual puck itself is a standardized size between each brand so the only measurement that matters is the spacing of the pucks, which differs between each vehicle manufacturer. I've attached a diagram below with the spacings used by…
view full answer...Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…
view full answer...In most cases, the tailgate on your truck can be left installed and in the down position while coupling to a 5th wheel trailer. Once the trailer is coupled you can then most likely raise the tailgate back up. I say in most cases as there could…
view full answer...