Customers compare DM8104311 to these similar products
Products Featured in this Video
Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this Demco hydraulic disc brake actuator with the drop and the electric lockout, and this is for a 2 5/16 diameter ball. Has a 12,500 pound weight capacity. Now, this hydraulic actuator will activate your trailer brakes when your tow vehicle slows or stops. Basically, what happens is when you apply the brakes in your… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
If you are absolutely sure you'd never be over the 12k number you listed a 12.5k actuator like the Demco part #DM8104311 would work great. I really like how easy to use the EZ latch couplers are of the Demco actuators. If you wanted extra…
view full answer...There is one picture that says typical photo. That photo is not what the coupler actually looks like. All the other pictures, included the one here, is what this coupler looks like. I also included a picture showing the measurements you have…
view full answer...The Demco Hydraulic Brake Actuator part #DM8104311 is a fit for trailer tongues 3" wide. If this is what you have then it will work well. If you are however looking for the bolt hole spacing then you can reference the attached photo.
view full answer...For your Dico Model 10 actuator the Titan replacement Inner Slide Assembly #T2478300183 is going to be exactly what you will need. It is recommended that you install new slide bearings as well so for that you would need part #T1020900. I attached a…
view full answer...I would be happy to help you set up a disc brake system for you 2012 Tandem axle boat trailer. Let's start with an actuator you are going to want the Titan Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball item #T4750800. This is a bolt on…
view full answer...The 2-5/16 inch straight tongue couplers are going to fit a 3 inch channel. Your best bet is still removal of the ball on the truck. My recommendation is a whole lot of penetrating oil and a sledge hammer. You won't have to whack it very hard but…
view full answer...We do have a variety of straight tongue couplers that fit with a 2-5/16" hitch ball like what you're looking for. We have standard couplers like the Demco #DM13203-95 as well as hydraulic actuator couplers like the Demco #DM8101801. I'm…
view full answer...I checked with our vendors and we do have an air bag kit for the PowerBoost model 2021 Ford F-150 4WD. It is the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL54JQ. These have a 5,000 lbs weight capacity which will be more than…
view full answer...The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…
view full answer...The DeeMaxx Disc Brake Kit #DE82FR with the Maxx coating has a salt spray rating of over 1,000 hours while the DeeMaxx Disc Brake Kit #DE54VR with the Stainless construction isn't rated for salt spray, but when I spoke with the owner he said the…
view full answer...Thanks for the picture! I do have an option for you, but we do not have a surge brake actuator for disc brakes that uses 3 holes in the bottom flange like yours. Before replacing it with the Demco Hydraulic Brake Actuator #DM8164311 you were looking…
view full answer...I have a solution for you but unfortunately we do not carry any axles that come with hydraulic brakes. What you will need to do is buy the parts separately, but I have all the parts you will need. First, for an axle, you will need the Dexter Axle…
view full answer...