Today we'll be reviewing part number CAM40431. This is the Camco RV and Enclosed Trailer Roof Vent Cover with a detachable screen. It's going to be a nice bright white in color. The cover is going to enclose your roof vent so you can safely open it at any time, rain or shine. It's going to let in light and air while keeping the elements out. It's also going to eliminate the threat of water leaking… see more >
Videos
Help Articles
Expert Answers
Slide out motors in RVs are powered by 12 volt DC power sources like the part #LC236575 that you referenced and the #LC130057.
view full answer...The Replacement Cam Lock Cylinder for RVs part #295-000004 measures 1-1/8" long and can be ordered keyed alike so you could obtain two with the same key.
view full answer...I checked with Edge and the CS2 part #EP85350 that you referenced has three levels for your 2018 Ford F-150 with a 5.0 liter V8. 87 octane tune adds 24 HP & 25 LB-FT of Torque Tow tune adds 30 HP & 31 LB-FT of Torque Extreme tune adds…
view full answer...If you are looking for the replacement lid, then you will need the Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted #FVK1020-19 or white #FVK1020-81 but it sounds like you are seeing the larger cover. To get the cover that allows the…
view full answer...The instructions for the Blue Ox Track Pro #BLU47FR are available on the product page towards the bottom, but I've also linked them to this answer for you, as well as a review video that you might find helpful.
view full answer...For as much tongue weight as your trailer has a weight distribution system would be a great choice to reduce the porpoising, reduce suspension sag, and improve handling and braking. For that the Blue Ox weight distribution system part #BLU47FR would…
view full answer...The Blue Ox SwayPro Weight Distribution System part #BXW0750 which is rated for 550 lbs - 750 lbs is what I recommend for a trailer with 550 lb tongue weight and around 100 lbs in the truck bed. In regards to choosing the best weight distribution…
view full answer...The total weight of the Blue Ox SwayPro Weight Distribution w/ Sway Control #BXW0750 is 87 lbs but in case you were concerned that it would add that weight as tongue weight you should note that the weight of a weight distribution system does not…
view full answer...The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…
view full answer...You can secure the bars when not in use, but it is not recommended since the weight distribution system was not meant to be used like that. Instead, a unique feature of the Blue Ox SwayPro Weight Distribution #BXW0750 is that there are locking pins…
view full answer...The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…
view full answer...This adapter plugs into the built-in connector beneath your vehicle's dashboard. To access this connector, first locate the instrument cluster finish panel in the center of you dash, near the driver's side. Carefully pry the panel out and…
view full answer...