Review of Andersen Gooseneck and Fifth Wheel Adapters - Adapts Trailer - AM3100 Video

Hello Cory. I can definitely point you in the right direction, but there is not a B&W Companion option that will fit into a round gooseneck ball hole. As you said, the B&W Companion hitch is only compatible with the B&W…

Hey Cody, you are installing this B&W Turnoverball #BWGNRK1020 on a 2021 Chevy 2500 correct? If so, the M14 bolts are definitely the correct size. It is possible that the holes in the frame are corroded which is preventing the bolts from…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

The Ranch Hitch, #3100, adapter base does thread onto a collar system, see drawing, comprised of a collar and 2 wedges that fit around and into the recessed portion of the trailers king pin. When the adapter is tightened onto the collars system on…

When installing the Andersen adapter part #AM3100 you either want to use 4 1-inch tack welds to the pin box or use the 4 included Grade 8 bolts. Either method is plenty strong but there are pros and cons of either. If you have access to a welder the…

Step 8 in the instructions for the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 states the following: 8) Locate the grade 8 bolts, lock washers, nuts and your drill and bit. There are eight holes drilled in the Ranch Hitch…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There are two options to add a rear hitch to your Grand Design Solitude. I have listed them below along with any installation videos we may have: By far the easiest option is going to be the Curt RV Bumper 2" Trailer Hitch Receiver item #E-100.…

Thanks for the picture! The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs item #DM8550046 is designed for applications like yours. The main requirement is that the top of the gooseneck ball must…

The gooseneck ball part #BWHB94009 that you referenced does have a 2 inch diameter shank like what you said you need. Do you need a coarse thread? If so this will work well as it is a 2 inch diameter shank with coarse threads.

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

Are you referring to the distance from the bottom of the coupler to the bottom of the offset bar on the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter part #AM3139? If so then that would be 4-3/4" as you can see in the attached…