What is the Least Visible Hitch Type Available for the Nissan Murano
Question:
I have a Nissan Maruna and want a hitch the least visible type. There seems to be different designs, are some more hidden then others? If so, which one of yours would be best for what Im looking for. Thanks in advance:
asked by: Richard G
Expert Reply:
The hitches available for your 2004 Nissan Murano both have a cross tube that runs side to side behind the receiver on the hitch. This tube, either square or round will be visible no matter the choice. For the least visible style of hitch, I would normally choose a round tube style. This construction is less noticeable and blends better with the shadows under the car than the squared edges of the square tube construction hitches.
My recommendation, for the least visible hitch in this case, would be the Draw-Tite Trailer Hitch for the Nissan Murano, 2004, item # 75148, which is a 2 inch Class III hitch. This Hitch has the chain connector on the top for a slightly more hidden look. This hitch has a towing capacity of 3,500 pounds gross trailer weight, a 350 lbs maximum tongue weight.
Some items you may need to complete your towing setup are listed below.
4-Way wiring - # 55571
1-7/8 Inch Hitch Ball - # 19256
2 Inch Hitch Ball - # 19258
Hitch Lock - # e98879
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >