Trailer Hitch for a 2014 BMW 335i XDrive Sedan
Question:
I cant seem to find a hitch for... 2014 BMW 335i XDrive sedan. No one makes this? Or any manufacturer perhaps in the process of developing this hitch? Thank you.
asked by: Art N
Expert Reply:
We do have a trailer hitch for your 2014 BMW 335i XDrive sedan. You can use Curt hitch # C11367. This is a Class I trailer hitch with a 1-1/4 inch receiver. If you need to do some light duty towing the compatible ball mount is # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring though you will need to visit a BMW dealer.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Q&A: Fuse Location for Trailer Brake Controller on a 2005 Chevy Silverado
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Q&A: Mounting Hole Dimensions of Buyers Products 45 Ton Pintle Hook
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Q&A: Why Does Ground Wire of Brake Controller Need to Run to Battery when 7-Way Grounds
- Article: Brake Controller Installation: Starting from Scratch
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose a Trunk-Mounted Bike Rack
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose a Bike Rack for a Sedan or Hatchback