Trailer Hitch Recommendation For 2015 Subaru Forester

Question

Question:

I have a 2015 Forester, looking for a class 1 with the cross bar hidden, 1 1/4 inch receiver, requires a small sq.cut in the lower part of the plastic bumper. Do you carry such a hitch? Thanks

asked by: Hershel F

0

Expert Reply:

Due to the design of the trailer hitches we offer for your 2015 Subaru Forester, the cross beam of our hitches are at the same height as the receiver opening.

Some trimming of the heat shield may be required when installing the hitches we offer but the hitches we carry do not require cutting the bumper.

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75876. This is a Class lll hitch with a 2 inch receiver opening. I have attached an installation video for this hitch on a 2015 Forester you can check out. The Class lll hitch will give you more options when you decide to tow, or carry any cargo or other hitch-mounted accessories. You can always carry lighter items with the Class lll hitch, but if you install a lighter duty hitch, you may not be able to carry some of the items you want to in the future.

If you are planning on towing with your Forester, I recommend the etrailer ball mount kit, part # 989900. This kit comes with 2 ball mounts, 2 hitch balls, the pin and clip and a handy storage bag. I have attached a product review video for this kit.

If a trailer connector is needed I recommend part # C56040. This is a simple installation. You just locate the connection points in the rear cargo area and you then have a 4-way connector at the rear of your vehicle. You can take a look at the installation video I have provided for the wiring harness.

Anytime you are working with electrical connections I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.

If you are planning on using the hitch for cargo or a bike carrier, just let me know and I can make some recommendations that will work for you.

expert reply by: Jeffrey L

0

Answer 1

When it comes to a hitch for your 2015 Subaru Forester, I recommend the Draw-Tite Trailer Hitch Receiver, #75876. This hitch is economically priced and does not require the use of a stabilizing strap. This is a great hitch to use with your Thule Apex…

view full answer...

Answer 2

For your 2018 Subaru Forester XT I recommend the Draw-Tite Class III Max Frame Receiver Hitch #76182 because it features a hidden design where only the receiver is visible beneath the vehicle. This provides you with a clean, OEM appearance unlike the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 6

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Trailer Hitch Recommendation For 2015 Subaru Forester

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching