Replacement Hardware for Curt Trailer Hitch on a 1999 Jeep Cherokee
Question:
I bought a used Curt trailer hitch code 13084 for my 1999 Jeep Cherokee. If I use that code, will I get the proper hardware from your site?
asked by: Thomas B
Expert Reply:
Yes, if you are on the replacement hardware kit page, # RHK, you would enter 13084 for hitch # 13084 where indicated for the hitch number and select Curt as the manufacturer to get the proper hardware for that hitch.
I have also linked a video showing installation and the instructions to the right for you.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included to the right that explains how to measure to choose a ball mount to tow the trailer level.
And for trailer wiring you can use # 118354. Video and instructions linked for the wiring as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Brake Assemblies and Hub/Drums for 15k Dexter Axle
- Q&A: Taillight Converter Needed To Separate Brake Lamp and Turn Signal Circuits
- Q&A: Recommended Replacement For A JVR9000R RV Stereo System With Three Cameras
- Q&A: 40' Wishbone Trailer Wiring With A Ground Wire Running Down Both Sides
- Q&A: Option to Replace Jensen JRV9000R
- Q&A: How To Convert A Wishbone Trailer Wiring Harness To A Regular 4-Flat Trailer Wiring Harness
- Article: Trailer Tire Sizing
- Q&A: No Turn or Brake Signals on Trailer on a Jeep Liberty with Tow Ready Harness 118524
- Article: Replacement Automotive Lighting
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: How to Choose the Right Trailer Hitch Class
- Article: The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)
- Article: My Trailer Hitch Doesn't Fit
- Article: 2023 Holiday Must Haves