Replacement Hitch Installation Hardware For Draw-Tite Class III Hitch # 41116
Question:
Im looking for mounting hardware for trailer hitch code number 41116.
asked by: Jeffrey A
Expert Reply:
We can provide you with replacement hitch installation hardware for your Draw-Tite Class III Hitch # 41116.
Simply enter the part # RHK into our search box; you'll then be prompted to enter the hitch number (41116) and select the hitch manufacturer (Draw-Tite) from the drop-down menu. You will then see the appropriate hardware kit.
Hitch installation hardware is single-use-only, so it is wise to use new hardware for re-installing this hitch on your 1995 Mercury Grand Marquis. To help your install I have linked two articles with helpful tips on hitch installation. The written instructions are also linked at right.
For towing the recommended extra-long ball mount is part # D-26. For a 1-7/8-inch hitch ball use part # 19260; for a 2-inch ball use # 63849; for a 2-5/16-inch ball use # 63847.
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Hitch Ball with 2" Diameter and 3-1/4" Long Shank, 7,500 lbs GTW - Chrome
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 3-3/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Hardware Kit for Trailer Hitches
- Q&A: Replacement Power Center For a Magnetek Model 80
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Article: My Trailer Hitch Doesn't Fit
- Q&A: 4-Pole Trailer Wiring Harness for 2007 Mercury Grand Marquis
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Q&A: Is There a Replacement for a Trimark 030-0900 Door Latch
- Q&A: Is a Heavy-Duty Hitch Available for Cargo Trailer?
- Q&A: Bracket Height and Receiver Tube Dimensions of Curt Adjustable Width Trailer Hitch Receiver C13702
- Q&A: Trailer Wiring Harness that Fits 2020 Mercedes GLC 300
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)