How to Find Replacement Hub for a Trailer Based on Spindle Dimensions
Question:
I have a bearing pair 15118 and 09074 on a spindle for 15 in 6x5 pattern. I was told when I called that this kit will be a good replacement. The problem is that the outer bearings on this kit are too large. I think the inner bearings are fine but Im worry. Could you please help ? Please let me know.
asked by: Thien
Expert Reply:
The bearing numbers you have do not cross reference with anything we offer, but I do have solution for you. You will need to use a micrometer to get exact dimensions of the spindle on your trailer so that I can see if we have a hub that will fit your spindles. Normally with bearing numbers we can find the correct hub, but since you have bearings that we have no info on we have to resort to spindle measuring.
Check out the picture I attached that shows where to measure on the spindle.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Trailer Grease Seal to Replace 127194TB
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: How to Charge a Dump Trailer Battery
- Q&A: Recommended Spare Tire Cover for 265/70R17 Size Tire
- Article: Most Popular Wheel Bearings
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Maintenance Schedule
- Q&A: Raising Trailer with Welded On Torsion Axles
- Q&A: 205/75R14 Size Trailer Tire Needed with Load Range D and Speed Rating of at Least 81 mph
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Distance From Hitch Pin Hole to Gusset on Curt Ball Mount C45112
- Article: Roadmaster Vehicle Specific Base Plates