Parts Needed to Install Hitch, Brake Controller, 7 Way and 4 Way on a 2002 Chevrolet Express Van
Question:
I need the products for a 2002 chevy 2500 express. I am going to need a trailer hitch class III, A brake control actuator and a 7 pole plug and wiring to complete the install. Also this van does not have a factory tow package , so must I install a t connector 4 pole flat prior to installing the 7 pole plug ? if you can email me the parts needed it would greatly be appreciated
asked by: Dan G
Expert Reply:
First we will start off with the hitch. I recommend going with the Curt Class III Receiver Hitch, # 13040, for your 2002 Chevrolet Express Van. This hitch receiver bolts directly to the frame of the van with no welding or drilling required.
For a t-connector we have the T-One Wiring Harness, # 118377, that plugs directly into your existing taillight wiring without any cutting or splicing.
In order to obtain a 7 way at the back of the van, you will need to install a Universal Installation Kit for Trailer Brake Controller, # ETBC7.
Since the brake controller itself is universal, you have numerous options. One of our economical options is the Hayes Engage Trailer Brake Controller # HA81760, and wiring adapter # HA81789-HBC. This brake controller engages your trailer's brakes with a preset intensity when you apply the brakes in your vehicle.
To complete the towing package, we offer Ball Mount # AMSC2, Hitch Pin and Clip, # PC3, 2 Inch Hitch Ball # 63845, and 1-7/8 Ball # 19260.
I have also attached a couple of links that you may want to take a look at.
![Leah S](https://images.etrailer.com/static/images/catg/people/631_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Hayes Engage Trailer Brake Controller - 1 to 3 Axles - Time Delayed
- Trailer Brake Controller
- Time Delayed Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 3 Axles
- Indicator Lights
- Up to 360 Degrees
- Hayes
more information >
Universal Wiring Adapter for Hayes Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Hayes
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Recommended Replacement Grease Seal and Braking Assemblies for an AL-KO 7210
- Q&A: Window Cover Recommendation for Class C Motorhome Built on F-550
- Q&A: Is The 1/2" Metal Loom Clamp # A0500 a Single Component Or Multiple Clamps?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Size Hardware Should Be Used With the Super Titan Forged Pintle Hook Plate
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Q&A: Solution for Needing Replacing Pump of Lippert Pump Assembly 646822
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: My Trailer Hitch Doesn't Fit
- Article: Car Camping Checklist
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller Installation: Starting from Scratch