Relocating License Plate and Bracket on a Utility Trailer
Question:
I have a 2000# rated 5 x 10 angle iron utility trailer and I drag my license plate constantly on things. Im looking for an alternative mounting bracket to raise it from below the tail light to some other position. My bracket gets bent almost every time I haul something. My trailer tows level and has 15inch wheels. I have seen people mount their plates flat on the fender but it looks bad plus it needs to be illuminated. I think that mine has additional angle iron uprights that could make adding an upper bracket easier. Any suggestions?
asked by: Lynd
Expert Reply:
I recommend using something like and L-bracket, such as # CE26098G, that you can attach to the top rail near the end of the trailer. Then you can attach a bracket such as # LPL55CB (may have to do some drilling/modify the L-bracket). Then you can ground the license plate bracket to the nearby frame of the trailer and the power wire to the running light circuit.
The wiring can be run along the frame to the nearest tail light for the power wire. You can use wire ties or even metal loom claps such as # A0250 to secure the wiring from the license plate bracket to the running light wire on the tail light.
Products Referenced in This Question
- Electrical Tools
- Cable Management
- Wire Clips and Clamps
- 1/4 Inch Diameter
- Black
- Redline
more information >
Mounting Bracket for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 1
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 6-1/2 Inch Wide
- Brackets
- 8-1/4 Inch Tall
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- CE Smith
more information >
Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens
- Trailer Lights
- License Plate Lights
- Rectangle
- Surface Mount
- Non-Submersible Lights
- LED Light
- 8-5/8L x 3-1/4W Inch
- White
- Optronics
more information >
Product Page this Question was Asked From
Trailer License Plate Mount Bracket, Angled, Rust Proof Polymer - Black
- Accessories and Parts
- License Plates and Frames
- Mounting Hardware
- Brackets
- Optronics
more information >
Continue Researching
- Shop: Ladder Rack
- Shop: Gorilla Tarp - 12 x 12 Weave - 10' x 14' - Red
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR E
- Video: CE Smith Trailer Fenders CE26098G Review
- Video: Optronics Trailer License Plate Mount Bracket Installation
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: 5 on 55
- Shop: RoundBar Adapter Kit for Yakima BigCatch Saddles - Qty 4
- Shop: Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Spoke Wheel - 5 on 4-1/2 - Load Range D
- Search Results: license plate mount
- Search Results: yakima outdoorsman
- Search Results: led trailer light kit
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Q&A: Can License Plate be Placed on Top of Tail Light Assembly of Detail K2 Mighty Multi Utility Trailer
- Shop: HitchMate StretchWeb Cargo Net with Hooks - 6' Wide x 10' Long
- Search Results: cargo net
- Search Results: tarp
- Video: Curt Single Hook Coiled Safety Cables Review
- Shop: Truck Bed Bike Rack
- Q&A: How to Upgrade Trailer with 45 MPH Speed Rating for Highway Speeds
- Q&A: Diameter of Croassbars for Erickson Truck Bed Ladder Rack
- Shop: Trailer Wiring
- Shop: Roof Rack
- Search Results: trailer hitch harness
- Q&A: Recommendation For Screws To Attach Pressure Treated Decking To a Flat Trailer
- Q&A: V Mounting Brackets to Convert Conventional Trailer into Pontoon Boat Trailer
- Q&A: What is the Speed Rating of the 20.5-8-10 Kenda Loadstar Trailer Tires?
- Q&A: Diameter of 3,500 lb Dexter Trailer Axle 35545I-ST-89
- Article: Trailer Wiring Diagrams