Customers compare LPL55CB to these similar products
Products Featured in this Video
Today we are looking at the Optronics LED Trailer License Plate Light with mounting bracket, part number LPL55CB. This is a 2 wire design; it comes with a power and a ground, so it can be mounted to all surfaces. It has 5 clear LEDs or Light Emitting Diodes.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, the #84556UC3-EZ is the correct hub and drum assembly and the #23-26-27 will work for brakes. However, you might want to consider the Dexter Nev-R-Adjust #23-468-469 for brakes instead. Since they are self-adjusting, you won't have to worry…
view full answer...It looks like you have a Dexter 3,500 Lb Axle so in order to replace the braking assemblies you can use the Electric Trailer Brake Kit part #AKEBRK-35-SA. If you want to replace the hubs as well then you can use the Dexter Trailer Hub and Drum…
view full answer...For the Dexter 10K axles a 5/8" wheel nut #95188.
view full answer...Some models of MaxxFan Vents have little tabs (pictured below) that allow for a quick and simple installation of vent covers like the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip #MA76JR or #MA86JR for black. These tabs allow you to clip your…
view full answer...I have a solution for you to hook up the Optronics LED Trailer License Plate Light w/ Bracket #LPL55CB to your 2021 Subaru Ascent without tapping into the wiring. You could install Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector -…
view full answer...To wire an illuminated license plate holder such as the Optronics LED #LPL55CB, you can simply splice into the running light circuit and ground wire from the trailer connector. I recommend using the 2 Wire Loop #9651P to make these connections. This…
view full answer...I spoke with my contact at Hopkins and he said on the Hopkins Trailer Break-Away Kit with Charger, part #HM20001, it is a gel cell battery so it can be mounted on its side. I am including a link to a FAQ page on trailer breakaway systems and a video…
view full answer...The auxiliary or back-up wire on a 7-way trailer connector like #HM20041, is used to power to things like interior trailer lights or other 12V accessories. It can also be used to power backup lights, but not many trailers are equipped with those.…
view full answer...The white wire is the ground wire of the breakaway kits like part #2028 that you referenced. When it is connected it is completing the circuit for the battery to the trailer wiring. The problem you are having would indicate that there is a circuit on…
view full answer...Some different brand names of trailer breakaway kits do originate from a common source, and this is also true for items like jacks, landing gear and steps. There really is not a lot to distinguish one from another, since their component parts are…
view full answer...We likely have an option for you to replace your trailer's tack room lock, but there are no specific replacement parts for your trailer, and we don't have a way of looking anything up, so the best we can do is offer you a way to choose your…
view full answer...You can wire a license plate light like part #LPL55CB without running wiring up to the front of the trailer. You simply attach the white wire with the ring terminal to a clean, bare metal surface like the trailer frame, and then attach the black wire…
view full answer...